SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA

The Loop-Measure Glove Stretcher: A Measuring Loop Kept in the Handle
A glove seller fitting a customer needed a stretcher to open the glove and a separate measure to know which size to open.
Moses Greensfelder of Harrisburg, Pennsylvania, received US 181,671, dated 29 August 1876, for "the combination of a hand-measure with a glove-stretcher, the measure being so arranged within the handle of the stretcher as to be capable of being drawn out for use, and is caused to regain its position in the handle by means of a suitable spring." The loop is put "around the widest part of the hand, when the index will stand at the number on the scale representing the size required."
This rung works out what the loop reads round hands of different shapes, then builds a tube handle with a spring-returned leather loop and an index, and measures several hands.
Średniozaawansowany
About 3 hours
Instrukcje
1
1
Loop reading round the hand
Loop reading round the hand
Wczytywanie notatnika Jupyter…
2
2
The stretcher it measures for
The stretcher it measures for
The embedded blueprint makes a hollow stretcher. Greensfelder puts the measure inside the stretcher's handle, so one tool sizes and stretches.
3
3
Read US 181,671
Read US 181,671
"A is the jaw of an ordinary glove-stretcher, which is chambered out to receive the measure B and spring a. C is a guide, which is attached to the free end of the spring a, and also to the inner end of the measure B."
"An index, b, is attached to the guide C, and slides in a slot, c, in the handle of the stretcher. A scale, d, representing the different sizes of gloves, is laid off on each side of the slot c."
4
4
Build the measuring handle and measure hands
Build the measuring handle and measure hands
**Handle.** Cut 25 cm of 10 mm aluminium tube. Saw a slot 12 cm long down one side with the hacksaw and file it smooth.
**Spring and guide.** Hook an extension spring to a pin through the tube's closed end. Hook the spring's free end to a short dowel that slides inside the tube as the guide, and screw a small screw through the slot into the guide as the index.
**Loop.** Cut a strip of leather 1 cm wide and 30 cm long, fix one end to the guide, and bring it out through the tube's open end as a loop with its other end fixed to the tube's outside.
**Scale.** Wrap the tape measure round a series of dowels and jars of known circumference, put the loop round each and mark where the index stands. Draw the scale beside the slot.
**Test.** Measure round five people's knuckles with the loop and with the tape measure, and measure each hand's width and thickness with the caliper. Compare with the notebook.
Materiały do tego kroku:
Rura aluminiowa0.25 metr
Sprężyna naciągowa1 sztuka
Kołki z twardego drewna0.05 metr
Skóra1 sztuka
Wkręty do drewna2 sztuk
Brystol1 sztuka
Taśma malarska1 sztukaPotrzebne narzędzia:
Piła do metalu
Pilniki (pilnik ręczny)
Wiertarko-wkrętarka akumulatorowa
Zestaw wierteł
Nóż introligatorski
Zestaw wkrętaków
Miara zwijana
Suwmiarka cyfrowa 6 cali
Ołówek5
5
A measure that sticks, stretches or reads wrong
A measure that sticks, stretches or reads wrong
Loop-measure glove stretcher troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**Moses Greensfelder** of Harrisburg, Dauphin County, Pennsylvania, filed US 181,671 on 12 June 1876; it is dated 29 August 1876. His loop was of leather or other pliable material, the stretcher could be of wood, horn, rubber, ivory or metal, and the scale could go on the loop instead of the handle. Eight years later Augustus Traver chose a rigid measure over this flexible loop.
**Honest limits.** An aluminium tube, an extension spring and a leather strip stand in for his chambered jaw, spring and loop, and no historical glove-size scale is given: the scale is marked by test. The notebook treats the hand as an ellipse; its sizes are examples. Your measurements are the result.
Materiały
7- 0.25 metrZastępnik
- 1 sztukaZastępnik
- 0.05 metrZastępnik
- 1 sztukaZastępnik
- 2 sztukZastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
Wymagane narzędzia
9- Zastępnik
- Zastępnik
- 1 vendor sell this, none ship to you yetZastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- 1 vendor sell this, none ship to you yetZastępnik
- Zastępnik
- 1 vendor sell this, none ship to you yetZastępnik
Powiązane blueprinty
Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami
CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

