SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
The Rooftop Fire Escape: A Railed Bridge to the House Next Door
Martin

Autor

Martin

27. wrzesień 2026NO
19
0
0
0
0

The Rooftop Fire Escape: A Railed Bridge to the House Next Door

In a row of tall city houses a fire on the stairs traps the people above it. The way out is up, through the roof hatch — and then across to the next house. Anna Connelly of Philadelphia filed US 368,816 on 13 May 1887; it is dated 23 August 1887. Her fire escape is "a bridge surrounded by a railing and having openings in the ends of the floor thereof", placed on the roofs of adjoining buildings so people can pass safely from one roof to the other, with alarms worked from the bridge to rouse the neighbours if their scuttle is shut. This rung works out how long an escape takes and what the bridge must carry, and builds a model between two boxes.
Początkujący
About 2 hours

Instrukcje

1

Crossing time and bridge strength

Wczytywanie notatnika Jupyter…
2

The way up to the roof

Every roof escape starts with a ladder to the hatch. The embedded blueprint makes one.
3

Read US 368,816

Connelly's invention "consists of a bridge surrounded by a railing and having openings in the ends of the floor thereof ... the said bridge being adapted to be placed on the roofs of adjoining or adjacent buildings, thereby permitting the ready and safe passage from one roof to the other." It further provides "alarms adapted to be operated from said bridge", whereby "the inmates of either or both of the said buildings may be alarmed". The bridge A has openings B at opposite ends of its floor, with guards C round them continuous with the side rails D. Placed so the openings are over the scuttles or trap doors, people pass up through one and "over the bridge to the opposite scuttle or trap door, being prevented from falling owing to the end guards and side rails". "Should said scuttle or trap-door not be open, the respective bell is rung, whereby the occupants of the house are alarmed or signaled", and they open it from within.
4

Model the escape

Stand two cardboard boxes 25 cm apart as neighbouring houses and cut a square hatch in each lid. Build a bridge from two dowel side rails and card decking, with a hole at each end over the hatches and guard rails round the holes, and glue it down. Load the middle of the bridge with weights until it sags visibly, measure the sag, and try a deeper side rail. Tie a small bell under one end that rings when a string across the far hatch is pulled.

Materiały do tego kroku:

Arkusze tektury falistejArkusze tektury falistej1 sztuka
Kołki z twardego drewnaKołki z twardego drewna1 sztuka
Brzęczyk piezoelektrycznyBrzęczyk piezoelektryczny1 sztuka

Potrzebne narzędzia:

Nóż introligatorskiNóż introligatorski
Mata do cięcia samoregenerującaMata do cięcia samoregenerująca
Pistolet do kleju na gorącoPistolet do kleju na gorąco
LinijkaLinijka
CiężarekCiężarek
5

A roof escape that fails

Roof escape checks.

Flow

Loading...
6

History and honest limits

**Anna Connelly** of Philadelphia filed US 368,816 on 13 May 1887; it is dated 23 August 1887. She claims a fire-escape bridge connectible with adjacent houses, with floor openings over their scuttles, guards and rails, and alarms operated from the bridge. **Honest limits.** Flow rates, crowd size and timber strength in the notebook are assumptions.

Materiały

3

Wymagane narzędzia

5

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...