Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Thompson (Nlaka'pamux) Sinew-Backed Bow: Juniper Stave, Sinew Glued to the Belly Then Bent Back, Cherry-Bark Grip (Teit, 1900)
Woody

Autor

Woody

15. listopad 2026NO
6
0
0
0
0

Thompson (Nlaka'pamux) Sinew-Backed Bow: Juniper Stave, Sinew Glued to the Belly Then Bent Back, Cherry-Bark Grip (Teit, 1900)

The best hunting bow of the Thompson (Nlaka'pamux) people, from James Teit: a juniper stave with deer sinew glued along its hollow side, then bent right over by two men so the sinewed side becomes the back, giving a bow that lies flat unstrung; the grip narrowed and wrapped with bitter-cherry bark, and a string of deer back-sinew.
Zaawansowany
A week or two, mostly glue drying

Instrukcje

1

Read Teit

"When the glue has set, two men bend the bow over so that what was originally the concave side becomes the back of the bow."
2

Shape the stave

Shape a stave of juniper (the Lower Thompsons also used hemlock, yew and dogwood), flat in section (Fig. 216 c), the middle a little narrower for the hand. Ours: about 1.2-1.4 m long.

Materiały do tego kroku:

Klepka z twardego drewnaKlepka z twardego drewna1 sztuka

Potrzebne narzędzia:

OśnikOśnik
NóżNóż
3

Glue on the sinew

Lay deer sinew in glue along the stave's concave side and let the glue set fully. Ours: shred dried back sinew into fibres, soak it, lay it overlapping in warm hide glue, and let it dry a week or more.

Materiały do tego kroku:

Sznur ze ścięgnaSznur ze ścięgna1 sztuka
Klej skórnyKlej skórny1 sztuka
WodaWoda1 sztuka

Potrzebne narzędzia:

Czajnik żeliwnyCzajnik żeliwny
PaleniskoPalenisko
4

Bend it over

Two people bend the bow over against its curve so the sinewed side becomes the back. Teit's Fig. 216 lies perfectly flat with the string off and takes its working curve when strung.

Potrzebne narzędzia:

LinaLina
5

Grip, string and finish

Wrap the narrow middle with what Teit calls bird-cherry bark (ours: taken as bitter cherry, Prunus emarginata). Make a string of twisted deer back-sinew (Apocynum twine served when sinew was short). Bows were often painted, or had incised lines filled with red on the flat inner side.

Materiały do tego kroku:

Kora gorzkiej wiśniKora gorzkiej wiśni1 sztuka
Nić ze ścięgnaNić ze ścięgna1 sztuka

Potrzebne narzędzia:

NóżNóż
6

Troubleshooting

Bow troubleshooting.

Flow

Loading...
7

History and honest limits

From James Teit, *The Thompson Indians of British Columbia*, **Memoirs of the American Museum of Natural History, Jesup North Pacific Expedition** vol. I part IV (1900), pp. 239-241 and Figs. 216-221 (checked on the archive.org scan cihm_16242). He also describes bows wrapped with cherry bark instead of sinew (weaker), a snakeskin-covered birch bow, plain bows for birds, and a hand-guard for the thumb. Length, sinew preparation and glue are ours.

Materiały

6

Wymagane narzędzia

5
  • Zastępnik
  • Zastępnik
  • Zastępnik
  • Zastępnik
  • Zastępnik

Według tego planu powstaje

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...