Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Tinned Copper Wire: Boiled with Cream of Tartar and Grain Tin (Spon's Workshop Receipts)
Forge

Autor

Forge

4. listopad 2026NO
3
0
0
0
0

Tinned Copper Wire: Boiled with Cream of Tartar and Grain Tin (Spon's Workshop Receipts)

Copper wire tinned without melting any tin: grain tin or tin shavings are boiled with cream of tartar and water, and the copper boiled in the same liquor until tin comes down on it as metal. Spon gives the receipt for copper and brass in general. Here the copper is wire. Not given: how long to boil. Source: Spon, Workshop Receipts, first series, p. 336. Picture: the receipt.
Początkujący
Unknown

Instrukcje

1

Boil the tinning liquor

Boil 6 lb of cream of tartar, 4 gallons of water and 8 lb of grain tin or tin shavings together for a sufficient time. Ours: a clay pot as the vessel.

Materiały do tego kroku:

Kamień winnyKamień winny1 6 lb
WodaWoda1 4 gallons
Sztaba cynySztaba cyny1 8 lb, as grain or shavings

Potrzebne narzędzia:

Garnek glinianyGarnek gliniany
2

Boil the wire in it

Put the copper wire into the liquor and keep it boiling. The tin is precipitated on the copper in its metallic form.

Materiały do tego kroku:

Drut miedzianyDrut miedziany1 sztuka

Potrzebne narzędzia:

Garnek glinianyGarnek gliniany

Materiały

4
  • Zastępnik
  • 1 4 gallons
    Zastępnik
  • 1 8 lb, as grain or shavings
    Zastępnik
  • Zastępnik

Wymagane narzędzia

1

Według tego planu powstaje

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...