Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA

Tweezers: Bent from a Thin Steel Strip (Cassell's, 1900)
Fine tweezers from a single strip of thin sheet steel, bent double so the spring of the bend holds the tips apart. Cassell's gives them for handling dead insects by the thorax.
Variable: strip 3/8 or 1/2 in wide, 6 or 8 in long.
Source: Cassell's Cyclopaedia of Mechanics (1900), p. 72. Picture: drawn by Youblob from the text.
Początkujący
Unknown
Instrukcje
1
1
Cut the strip
Cut the strip
Cut a strip of thin sheet steel 3/8 or 1/2 in wide and 6 or 8 in long.
Materiały do tego kroku:
Taśma stalowa (stal sprężynowa, cienka)1 stripPotrzebne narzędzia:
Nożyce do blachy2
2
Bend it double
Bend it double
Bend the strip double at the middle until the two ends meet. Ease the bend so that its spring holds the ends about 3/4 to 1 in apart when free.
Potrzebne narzędzia:
Imadło warsztatowe
Młotek3
3
Point the ends
Point the ends
File the two ends to a blunt point.
Potrzebne narzędzia:
Pilnik do metaluMateriały
1- Zastępnik
Wymagane narzędzia
4- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
Według tego planu powstaje
CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.
