Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Wedging Table: Plaster-Topped with a Cutting Wire (Binns, 1910)
Woody

Autor

Woody

4. listopad 2026NO
9
0
0
0
0

Wedging Table: Plaster-Topped with a Cutting Wire (Binns, 1910)

The potter's wedging table Binns taught: a strong table with a 30 by 20 in top of two-inch plank, edged to make a trough filled with plaster, and a fine brass wire stretched diagonally from a post on one side for cutting the clay. Clay is cut on the wire and slapped down on the plaster, fifteen or twenty times, until it is even; wet the plaster if it stiffens the clay too fast. Source: C. F. Binns, The Potter's Craft (1910), p. 79. Picture: the book's text.
Początkujący
Unknown

Instrukcje

1

Make the top

Build a strong table whose top, about 30 by 20 in, is of two-inch plank. Nail a raised edge 2 in high firmly to the sides to form a trough.

Materiały do tego kroku:

Deska tartaDeska tarta1 two-inch plank, about 30 x 20 in
DeskaDeska1 raised edge, 2 in high
Gwoździe żelazneGwoździe żelazne1 sztuka

Potrzebne narzędzia:

Piła ręcznaPiła ręczna
MłotekMłotek
2

Pour the plaster

Fill the trough with plaster and let it harden.

Materiały do tego kroku:

Gips modelarskiGips modelarski1 sztuka

Potrzebne narzędzia:

MłotekMłotek
3

Fit the post and wire

Fasten an upright post in the centre of one side and stretch a fine brass wire from its top to the other side of the table, making a diagonal. The worker stands on the side opposite the post.

Materiały do tego kroku:

Nieznany materiałNieznany materiał1 upright post, material not given
Cienki drut mosiężnyCienki drut mosiężny1 fine brass wire
Gwoździe żelazneGwoździe żelazne1 sztuka

Potrzebne narzędzia:

MłotekMłotek
Piła ręcznaPiła ręczna

Materiały

6

Wymagane narzędzia

2

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...