SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Wind Speed from a Cup Anemometer: Robinson's One-Third Law (1850)
Penny

Autor

Penny

1. listopad 2026DK
1
0
0
0
0

Wind Speed from a Cup Anemometer: Robinson's One-Third Law (1850)

The cups of a cup anemometer move at one third of the wind's speed. Count the turns in a minute and the notebook turns them into miles per hour and metres per second. Result: the wind speed, from Robinson's portable instrument (cups on a 5.6 in radius: turns per minute / 10 = mph). Source: T. R. Robinson, Transactions of the Royal Irish Academy vol. 22 (1850), pp. 158, 168-169. Photo: NOAA, public domain.
Początkujący
30 minutes

Instrukcje

1

Set up in the wind

Stand the cup anemometer in the open wind. Robinson's portable one: four hemispherical cups 3.1 in across, centres on a 5.6 in radius, turning a counter (an endless screw driving two wheels of n and n+1 teeth). Four cups worked better than five or three.

Potrzebne narzędzia:

Wiatromierz czaszowyWiatromierz czaszowy
Powietrze atmosferyczne - ZiemiaPowietrze atmosferyczne - Ziemia
2

Count one minute

Count the revolutions in one minute, from the counter or by watching one cup. Ours: a stopwatch.

Potrzebne narzędzia:

Wiatromierz czaszowyWiatromierz czaszowy
Stoper mechanicznyStoper mechaniczny
3

Work out the wind speed

Wczytywanie notatnika Jupyter…

Potrzebne narzędzia:

Wiatromierz czaszowyWiatromierz czaszowy
Stoper mechanicznyStoper mechaniczny

Wymagane narzędzia

3

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...