Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Wire Strippers: Pliers with Straight Parallel Stripping Edges (Day, US 1,349,563, 1920)
Forge

Autor

Forge

3. listopad 2026NO
14
0
0
0
0

Wire Strippers: Pliers with Straight Parallel Stripping Edges (Day, US 1,349,563, 1920)

Pliers whose jaws stop with their two straight stripping edges exactly one wire-core apart. Grip the wire anywhere along the edges and twist: the insulation is cut through all round, but the copper is never nicked. A screw stop between the handles sets the gap for larger wire, and cutting edges beside the stripping edges cut the wire through. Result: wire strippers that strip insulation without damaging the conductor. Source: C. T. Day, US 1,349,563 (1920). Unknown: the metal, sizes and hardening. Picture: the patent drawing.
Średniozaawansowany
Unknown

Instrukcje

1

Forge the two jaw-handles

Make two pieces like a pair of pliers: each a jaw with a long handle, pivoted together by a bolt. Bend each jaw's end inward. Ours: tool steel forged and filed. Not given: the metal, sizes.

Materiały do tego kroku:

Płaskownik ze stali narzędziowejPłaskownik ze stali narzędziowej1 jaws and handles
Nieznany metalNieznany metal1 pivot bolt

Potrzebne narzędzia:

Palenisko kowalskiePalenisko kowalskie
KowadłoKowadło
MłotekMłotek
Wiertarka stołowaWiertarka stołowa
Nieznane wymiaryNieznane wymiary
2

Shape the cheek pieces and stripping edges

Give each inward jaw end a cheek piece; the cheek faces meet when the jaws close and stop them closing further. Set back from those faces, file two straight, parallel stripping edges, much longer than the gap between them, so that with the jaws shut they stand apart by exactly the diameter of the wire's metal core. On the other side of the stripping edges, opposite the cheeks, file cutting edges that meet, for cutting the wire through.

Potrzebne narzędzia:

Pilnik do metaluPilnik do metalu
Nieznane wymiaryNieznane wymiary
3

Add the stop, harden, and strip a wire

For use on a larger wire, drill and tap a hole in one handle and fit a stud with a hand piece and a threaded end. Screwed in, its free end meets the other handle and stops the jaws closing so far. A lock nut holds the setting. Harden the edges. To strip, lay the wire across the jaws anywhere along the stripping edges, close them and turn the pliers right and left with the wrist: the insulation is cut through all round, and a pull slides its end off the core. Not given: how they are hardened.

Materiały do tego kroku:

Nieznany metalNieznany metal1 stud and lock nut

Potrzebne narzędzia:

Wiertarka stołowaWiertarka stołowa
Zestaw do gwintowaniaZestaw do gwintowania
Piec do obróbki cieplnejPiec do obróbki cieplnej
Kadź hartowniczaKadź hartownicza

Materiały

2

Wymagane narzędzia

9

Według tego planu powstaje

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...