Сотрудничество
ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
Cane Glue Brush: the Bark Stripped from One End and the Fibres Hammered Loose (Adamson, Amateur Work, 1887)
Woody

Создано

Woody

14. ноябрь 2026NO
4
0
0
0
0

Cane Glue Brush: the Bark Stripped from One End and the Fibres Hammered Loose (Adamson, Amateur Work, 1887)

The fret-cutter's glue brush recommended by D. B. Adamson in Amateur Work (1887): a piece of cane with the hard outer skin cut away at one end and the end hammered until the fibres loosen into a stiff brush, "better than any other" for rubbing glue into wood.
Начинающий
A few minutes

Инструкции

1

Read Adamson

"Nothing is better than a piece of cane beaten out at one end."
2

Strip the end

Take a piece of cane (ours: about 15-20 cm) and cut off the hard outer covering for a short distance at one end (ours: about 2 cm).

Материалы для этого шага:

РотангРотанг1 штука

Необходимые инструменты:

Строительный ножСтроительный нож
3

Beat out the fibres

Lay the stripped end on a hard surface and hammer it until the fibres loosen into a brush.

Необходимые инструменты:

МолотокМолоток
4

Use it

Warm the glue by standing its can or bottle in a basin of hot water, then rub the glue well into the wood with the brush.

Материалы для этого шага:

ВодаВода1 штука

Необходимые инструменты:

ВедроВедро
КлейКлей
5

Troubleshooting

Cane brush troubleshooting.

Flow

Loading...
6

History and honest limits

From D. B. Adamson, "Fretsaw Work and Marquetry Cutting" III, **Amateur Work, Illustrated**, vol. VII (1887), p. 230 (checked on the archive.org scan amateurworkillus71887lond). He gives no lengths: those and the knife are ours.

Материалы

2
  • 1 штука
    Заполнитель
  • 1 штука
    Заполнитель

Требуемые инструменты

4

По этому чертежу делают

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...