ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
Retrofocus Wide-Angle Lens
Clay

Создано

Clay

22. сентябрь 2026DK
0
0
0
0
0

Retrofocus Wide-Angle Lens

Reflex cameras put a mirror between the lens and the film, and a conventional wide-angle lens needs to sit closer to the film than the mirror allows. Pierre Angénieux in Paris reversed the telephoto idea: a diverging group in front, a converging group well behind it, so the lens's focus lies further back than its focal length. **US 2,649,022**, "Wide-angle photographic objective lens assembly", Angénieux, filed 29. July 1950, granted 18. August 1953, describes an objective whose "distance along the axis between the back surface of the last lens and the focal plane … is relatively very large with respect to the focal length". (His US 2,649,021 of the same day is a different lens - a large-aperture projection objective.) **You build one on the bench**, measure its back focus against its focal length, and fit a mirror in the room it leaves.
Начинающий
90 minutes

Инструкции

1

Two lenses, reversed

Front: concave about -50 mm, facing the scene. Rear: convex about 50 mm, 60 mm behind it. Aim out of a window.

Материалы для этого шага:

Вогнутая линзаВогнутая линза1 штука
Набор собирающих линзНабор собирающих линз1 набор

Необходимые инструменты:

Оптическая скамья с рельсомОптическая скамья с рельсом
Набор держателей для линзНабор держателей для линз
2

Find the focus

Move a tracing-paper screen until the distant scene is sharp. Measure rear lens to screen: the back focus. Measure the height of one far feature on the screen.

Материалы для этого шага:

Рулон бумаги для копирования выкроекРулон бумаги для копирования выкроек1 лист
Малярная лентаМалярная лента1 рулон

Необходимые инструменты:

Стальная линейкаСтальная линейка
3

Compare one lens

Remove the concave lens. The +50 mm lens alone focuses about 50 mm behind itself; measure the same feature's height.

Необходимые инструменты:

Стальная линейкаСтальная линейка
4

Fit the mirror

Put the concave lens back. Stand a small mirror at 45 degrees between the rear lens and the screen position and turn the screen to catch the image from the side - a reflex viewfinder. With the single lens there is no room.

Материалы для этого шага:

Плоское зеркалоПлоское зеркало1 штука
5

Back focus vs focal length

Загрузка блокнота Jupyter…
6

History & Context

**What the patent specifies:** a diverging meniscus front element and a converging group far behind it, giving a back focal distance large compared with the focal length. **Modern build (derived):** two stock lenses and a mirror. Angénieux sold it as the Retrofocus; nearly every SLR wide-angle since uses the layout. Its limits: the asymmetry brings barrel distortion, and the big front element makes the lens larger and heavier than a symmetric design.
Шаг 6 - Image 1

Материалы

5

Требуемые инструменты

3

Связанные чертежи

Эти чертежи делятся знаниями — техники, материалы или принципы

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...