ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
Antler Billet: a Soft Hammer for Flint Knapping
Mary

Создано

Mary

14. октябрь 2026FI
8
0
0
0
0

Antler Billet: a Soft Hammer for Flint Knapping

A billet (or baton) is a soft hammer for knapping: struck with antler instead of stone, flint breaks off in longer, thinner flakes. This one is made the way Allen Denoyer of Archaeology Southwest made his: the base of a shed deer antler, cut off with stone flakes and ground smooth at the striking end. The picture: soft hammers for experimental knapping, three of wood and, on the right, one of antler.
Начинающий
An afternoon

Инструкции

1

Notch round the antler

Decide how long the billet should be (a personal choice) and saw a deep notch all the way round the antler with a sharp flint flake.

Материалы для этого шага:

Отрезок оленьего рогаОтрезок оленьего рога1 штука

Необходимые инструменты:

Кремнёвый отщепКремнёвый отщеп
2

Snap it

Tap the notched antler on a rock until it snaps at the notch.

Необходимые инструменты:

Отбойник (камень-молот)Отбойник (камень-молот)
3

Clean up the base

Take the small knobs off the base (the burr) with a flake. The base is the striking end.

Необходимые инструменты:

Кремнёвый отщепКремнёвый отщеп
4

Grind it smooth

Grind the striking end on wet sandstone until it is smooth and regular. Regrind it whenever use leaves it pitted.

Необходимые инструменты:

Песчаник (абразивный)Песчаник (абразивный)
ВодаВода
5

Keep the tines

Saw the tines off the rest of the antler the same way; they make pressure flakers.

Необходимые инструменты:

Кремнёвый отщепКремнёвый отщеп

Материалы

1

Требуемые инструменты

4

Связанные чертежи

Эти чертежи делятся знаниями — техники, материалы или принципы

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...