Сотрудничество
ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
Barrel-Stave Hammock: Notched Staves Held by Ropes Twined Round Their Ends (Boy Mechanic, 1913)
Woody

Создано

Woody

13. ноябрь 2026NO
1
0
0
0
0

Barrel-Stave Hammock: Notched Staves Held by Ropes Twined Round Their Ends (Boy Mechanic, 1913)

A hammock of barrel staves, "more comfortable than one would think", from The Boy Mechanic (1913): smooth staves notched at the ends and strung side by side on ropes, which are gathered and tied to two trees. It can be left out in the rain. The book gives no sizes: the length of the staves sets the width of the bed.
Начинающий
About 2 hours

Инструкции

1

Read The Boy Mechanic

"A hammock made of barrel staves is more comfortable than one would think, considering the nature of the material employed in making it."
2

Choose and smooth the staves

Select good, smooth barrel staves, enough laid side by side to make the hammock as long as you are tall (our rule). Sandpaper them thoroughly; he says this makes a great improvement.

Материалы для этого шага:

Бочарная клёпкаБочарная клёпка12 штук
Наждачная бумагаНаждачная бумага1 штука
3

Notch the ends

Cut half circles out of the edges of each stave near both ends, as at AA in his drawing, so the ropes lie in them. Mark them at the same place on every stave so the staves line up. Boring a hole on the edge line and sawing it in half is our way of cutting them.

Необходимые инструменты:

КарандашКарандаш
Коловорот с перкойКоловорот с перкой
Ножовка по деревуНожовка по дереву
4

String the staves

Lay the staves side by side and pass the ropes round their ends through the notches, twining them between the staves as at B, at both ends. The weight then hangs on four ropes at each end, so small ropes such as clothes lines will do.

Материалы для этого шага:

Бельевая верёвкаБельевая верёвка1 штука
5

Hang it

Gather the ropes at each end and tie them round two trees or posts, leaving the hammock a little slack so the bed curves as in the drawing.

Материалы для этого шага:

Бельевая верёвкаБельевая верёвка1 штука
6

Troubleshooting

Hammock troubleshooting.

Flow

Loading...
7

History and honest limits

From **The Boy Mechanic**, edited by H. H. Windsor, Popular Mechanics, Chicago, 1913, p. 75, "Barrel-Stave Hammock", sent in by H.G.M. of St. Louis (Project Gutenberg 12655). He gives no sizes or number of staves; the count, the length rule and the way of cutting the notches are ours.

Материалы

3

Требуемые инструменты

3

По этому чертежу делают

Связанные чертежи

Эти чертежи делятся знаниями — техники, материалы или принципы

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...