ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
Brick Blacksmith's Forge with a Bottom-Blast Tuyere
Forge

Создано

Forge

11. октябрь 2026NO
19
0
0
0
0

Brick Blacksmith's Forge with a Bottom-Blast Tuyere

A forge is a hearth with a bowl for the fire and an opening in its bottom, the tuyere, through which the blast of air is forced. One smith's forge of the 1880s was two feet four inches high and four feet square, built of brick and stone, with a 12-inch chimney flue, the tuyere iron set four inches below the surface and the forge hollow underneath so the fire could be dumped and the ashes cleared. Advice of the same time: keep the tuyere's centre at least eighteen inches from the back wall and the working side, set its top four to six inches below the hearth (deeper for heavy work), and leave a recess in the back wall at least 8 inches deep, 24 high and 24 wide. The blast came from a blower or bellows.
Средний
Several days

Инструкции

1

Build the base

Build the hearth of brick and stone, about two feet four inches high and four feet square (one smith's size), hollow underneath with an opening for the ash.

Материалы для этого шага:

Кирпичи из обожжённой глиныКирпичи из обожжённой глины1 as required
КамниКамни1 as required

Необходимые инструменты:

Кельма каменщикаКельма каменщика
2

Back wall and recess

Raise the back wall and chimney with a 12-inch flue; leave a recess at least 8 in deep, 24 in high and 24 in wide behind the fire.

Материалы для этого шага:

Дымоходная трубаДымоходная труба1 штука

Необходимые инструменты:

Кельма каменщикаКельма каменщика
3

Set the tuyere

Set the tuyere with its centre at least 18 in from the back wall and the working side, its top 4–6 in below the hearth surface.

Материалы для этого шага:

Фурма горнаФурма горна1 штука
4

Blast

Connect the blower or bellows to the tuyere pipe, with a way to open it underneath and clear cinders.

Необходимые инструменты:

Кузнечный вентилятор с ручным приводомКузнечный вентилятор с ручным приводом

Материалы

4

Требуемые инструменты

2

Связанные чертежи

Эти чертежи делятся знаниями — техники, материалы или принципы

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...