Сотрудничество
ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
Filter Press: Iron Plates and Frames Clamped by a Jack-Screw (Spencer, 1917)
Emma

Создано

Emma

4. ноябрь 2026SE
8
0
0
0
0

Filter Press: Iron Plates and Frames Clamped by a Jack-Screw (Spencer, 1917)

The sugar-house filter press: a row of iron plates and frames, each covered with filter cloth, hung on a heavy framework and squeezed together by a strong jack-screw. The cloth itself seals the joints. Mud pumped in collects as cake in the frames, and the clear liquid runs out through cocks on the plates. Result: a plate-and-frame filter press that works best at about 40 lb per square inch. Source: G. L. Spencer, A Handbook for Cane-Sugar Manufacturers (1917), pp. 66-67. Unknown: sizes and the number of chambers. Picture: a drawn diagram.
Продвинутый
Unknown

Инструкции

1

Make the plates and frames

Make the plates and frames of iron, with outlet openings and cocks on the plates for the filtered liquid. For a frame (side-feed) press, cast a lug on each frame and plate with an opening, so the lugs line up into a mud channel. For a centre-feed press, make heavy recessed plates with a round opening in each instead. Ours: iron castings. Not given: sizes, the number of chambers.

Материалы для этого шага:

Чугунные отливкиЧугунные отливки1 plates and frames
Неизвестный вентильНеизвестный вентиль1 outlet cocks

Необходимые инструменты:

Фрезерный станокФрезерный станок
Сверлильный станокСверлильный станок
Неизвестные размерыНеизвестные размеры
2

Build the frame and jack-screw

Build a heavy framework that carries the plates and frames in a row, with a powerful jack-screw at one end to clamp them together. Not given: the framework's sizes and metal.

Материалы для этого шага:

Неизвестный металлНеизвестный металл1 framework and jack-screw

Необходимые инструменты:

Сверлильный станокСверлильный станок
Неизвестные размерыНеизвестные размеры
3

Dress it with cloth

Hang a heavy cotton filter cloth over each plate, with a thin cotton cloth over it to protect it from wear; the cloth makes the joints between plates and frames. In a frame press the cloth has no hole, and rubber rings or cloth 'stockings' seal between the lugs. In a centre-feed press, cut a hole in the cloth to match each plate's opening and clamp the cloth to the plate there. Screw the pack tight.

Материалы для этого шага:

Грубая хлопчатобумажная фильтровальная тканьГрубая хлопчатобумажная фильтровальная ткань1 heavy cloths
Тонкая хлопковая фильтровальная тканьТонкая хлопковая фильтровальная ткань1 thin cover cloths
Лист натурального каучукаЛист натурального каучука1 lug rings

Необходимые инструменты:

НожницыНожницы
4

Steam it and press

Before use, blow steam through the press until it comes freely from the cocks. Pump the mud in: about 40 lb per square inch gives very good work, and juice is pumped in at up to about 45 lb. More pressure risks breaking the press and blinding the cloths. The solids collect in the frames and the clear liquid runs off at the cocks. To wash the cake, close the cocks on the water plates and force water through it. Ours: a diaphragm pump.

Необходимые инструменты:

Паровой котёлПаровой котёл
Мембранный насосМембранный насос

Материалы

6

Требуемые инструменты

6

По этому чертежу делают

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...