ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
Grosgrain Ribbon: Close Plain Weave with a Heavy Weft
Tex

Создано

Tex

18. октябрь 2026FO
8
0
0
0
0

Grosgrain Ribbon: Close Plain Weave with a Heavy Weft

Grosgrain is a firm, closely woven plain weave with a heavier weft than warp, which gives it ribs running across the width. It is used for hat bands, facings and waistbands. Historically it was silk or wool; this one is cotton, woven narrow on a rigid heddle loom. The picture: grosgrain ribbons (Wikimedia Commons).
Средний
Two evenings

Инструкции

1

The thread and twine

Spinning the fine warp thread and the heavier twine used as weft.
2

Measure the warp

For a ribbon 2.5 cm wide and 3 m long, wind enough fine warp threads to fill 2.5 cm of the heddle, each 3.5 m long to allow for tying on and loom waste.

Материалы для этого шага:

Хлопковая основная нитьХлопковая основная нить1 as required

Необходимые инструменты:

Сновальная доскаСновальная доска
РулеткаРулетка
ЛинейкаЛинейка
3

Thread the heddle

Centre the warp in the heddle, one end through each slot and each hole, wind on under even tension and tie on at the front.

Необходимые инструменты:

Ткацкий станок с жёстким бердомТкацкий станок с жёстким бердом
4

Weave with a heavy weft

Wind the twine on the shuttle. Weave plain weave: one pass with the heddle up, one with it down, and beat each pick firmly so the weave is close and the heavy weft forms ribs across the ribbon.

Материалы для этого шага:

Хлопчатобумажный шпагатХлопчатобумажный шпагат1 as required

Необходимые инструменты:

Ткацкий станок с жёстким бердомТкацкий станок с жёстким бердом
ЧелнокЧелнок
5

Keep the edges straight

Draw each pick snug at the edges so the ribbon keeps its width; measure the width often.

Необходимые инструменты:

ЛинейкаЛинейка
6

Cut off and secure

Cut the ribbon off the loom and knot or stitch both ends so the weft cannot slip off.

Необходимые инструменты:

Портновские ножницыПортновские ножницы
7

Troubleshooting

Grosgrain troubleshooting.

Flow

Loading...

Материалы

2

Требуемые инструменты

6

По этому чертежу делают

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...