ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
Hardwood Logs: Tree Felled with Notch and Back Cut, Limbed and Bucked
Woody

Создано

Woody

14. октябрь 2026NO
19
0
0
0
0

Hardwood Logs: Tree Felled with Notch and Back Cut, Limbed and Bucked

Logs come from a felled tree. Cut a V-shaped notch on the side you want it to fall, then a back cut from the other side toward it; the strip left between them is the hinge that steers the fall. Then cut off the branches (limbing) and saw the trunk into logs (bucking). The picture: fallers on springboards beside a notched conifer, Clallam County, Washington, about 1905 (MOHAI 5981): the notch is the same on any tree.
Продвинутый
A day

Инструкции

1

Plan the fall

Choose a sound hardwood tree such as oak, maple or beech. Look at its lean and the wind, pick a clear line to fall it on, and clear two escape paths back and to the side.

Материалы для этого шага:

Дерево - листопадноеДерево - листопадное1 штука

Необходимые инструменты:

Защитная каскаЗащитная каска
2

Cut the notch

On the side of the fall, chop a V-shaped notch about a quarter of the way into the trunk (our choice). Its back line sets the direction.

Необходимые инструменты:

ТопорТопор
Защитная каскаЗащитная каска
3

Back cut, leave the hinge

Saw in from the opposite side, a little above the bottom of the notch. Stop short, leaving a strip of wood uncut: the hinge. Tap a wedge into the cut to tip it. Walk away along your escape path as it goes.

Необходимые инструменты:

Двуручная поперечная пилаДвуручная поперечная пила
Деревянный валочный клинДеревянный валочный клин
ТопорТопор
Защитная каскаЗащитная каска
4

Limb it

Cut the branches off flush with the trunk, working from the base toward the top, standing on the other side of the trunk from the branch.

Необходимые инструменты:

ТопорТопор
Защитная каскаЗащитная каска
5

Buck into logs

Mark the lengths you need with the chalk line and saw the trunk through at each mark. Prop the trunk so the cut opens and does not pinch the saw.

Необходимые инструменты:

Двуручная поперечная пилаДвуручная поперечная пила
Отбивочный шнурОтбивочный шнур
Деревянный валочный клинДеревянный валочный клин
6

How much wood is in the logs

Загрузка блокнота Jupyter…
7

Limits

Notch, back cut, hinge, limbing and bucking follow Wikipedia's account of tree felling; the notch depth is ours. A falling tree kills: fell only trees you are able to, with no one inside two tree-lengths.

Материалы

1

Требуемые инструменты

5

Связанные чертежи

Эти чертежи делятся знаниями — техники, материалы или принципы

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...