Сотрудничество
ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
Iron Retort: a Mercury Flask with an Iron Tube Screwed In (Morfit, 1849)
Charlie

Создано

Charlie

7. ноябрь 2026DE
3
0
0
0
0

Iron Retort: a Mercury Flask with an Iron Tube Screwed In (Morfit, 1849)

A small iron retort for distilling dry substances that need a high heat. Campbell Morfit (1849) says all iron retorts should be of cast metal, but gives a simpler and cheaper one: an empty mercury flask with an iron gas tube or gun barrel screwed into the top, reaching nearly to the bottom, and another tube bent downwards (his Fig. 205). The retort is heated in a furnace. Flask size, tube sizes and how the side tube is joined are not given. Source: C. Morfit, Chemical and Pharmaceutic Manipulations (1849), pp. 241-242. Picture: Fig. 205.
Начинающий
Unknown

Инструкции

1

Read Morfit

"A simpler and more economical apparatus is a mercury flask, Fig. 205, with an iron gas tube or gun barrel screwed into the top, and reaching nearly to the bottom, and another tube bent downwards. This arrangement, well fitted for distilling dry substances which require a high heat, may be modified by removing the centre pipe and inserting a screw plug, and thus be made well adapted to the distillation of mercury."
2

Screw in the centre tube

Take an empty mercury flask. Screw an iron tube into the top so that it reaches nearly to the bottom of the flask (Fig. 205). Ours: thick-walled steel pipe with threaded ends stands for the iron gas tube. Its bore and length are not given.

Материалы для этого шага:

Ртутная флягаРтутная фляга1 штука
Стальная труба (толстостенная, с резьбовыми концами)Стальная труба (толстостенная, с резьбовыми концами)1 centre tube

Необходимые инструменты:

Трубный ключТрубный ключ
3

Fit the bent side tube

Fit a second tube at the top of the flask, bent so it leads away to the receiver (Fig. 205). Morfit does not say how this tube is joined to the flask or how it is bent (unknown).

Материалы для этого шага:

Стальная труба (толстостенная, с резьбовыми концами)Стальная труба (толстостенная, с резьбовыми концами)1 side tube
Неизвестный разъёмНеизвестный разъём1 штука

Необходимые инструменты:

Слесарные тискиСлесарные тиски
Трубный ключТрубный ключ
4

History and honest limits

Faraday (Chemical Manipulation, 1830) describes small iron retorts as bottles with an iron tube fitted by a ground joint, used mostly for distilling oxygen, and heated best by a coal or coke fire. Morfit heats all iron retorts in furnaces, greases them when not in use against rust, and keeps them stoppered. For mercury he takes out the centre pipe and puts in a screw plug. Not given: flask size, tube bore and length, how the side tube is joined and bent.

Материалы

3

Требуемые инструменты

2

По этому чертежу делают

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...