
Coconut Fiber Harvesting — From Husk to Fiber
A guide to the traditional Thai methods of harvesting and extracting fibers from coconut husks (coconut fiber/coco fiber). Covering the selection of suitable coconuts, water retting, fiber separation by beating, through to sun drying and storage. Coconut fiber is a raw material for making rope, mats, brushes, and filter materials.
Инструкции
Select suitable coconuts
Select suitable coconuts
Select mature coconuts (10-12 months old) with the outer shell turned brown. Mature coconuts have stronger and longer fibers than young coconuts. Young coconuts (green color) have fibers that are too soft for making rope.
Материалы для этого шага:
Mature Coconuts (10-12 months)20 штукPeel off the outer shell from the coconut
Peel off the outer shell from the coconut
Insert a sharp steel spike (crowbar) into the ground at an angle. Apply pressure with the force of the coconut on the tip of the steel to pierce into the shell, then pry it out. Repeat around the coconut until the shell comes off completely. Separate the shell (husk) from the coconut.
Необходимые инструменты:
Husking Spike (Iron Stake)Cut the shell into small pieces
Cut the shell into small pieces
Cut the coconut shell into pieces approximately 15-20 cm in size. Smaller pieces will be soaked more thoroughly and the fibers will separate more easily
Необходимые инструменты:
MachetePrepare the soaking basin
Prepare the soaking basin
Материалы для этого шага:
Необходимые инструменты:
Large Plastic Tank or Concrete BasinSoak the coconut husks in water (retting)
Soak the coconut husks in water (retting)
Материалы для этого шага:
Weighing Stones5 kilogramCheck weekly
Check weekly
Soak for 2-4 weeks
Soak for 2-4 weeks
Lift the shells out of the water
Lift the shells out of the water
Remove the soaked shells from the pond, let the water drip out for a moment, put them in a mesh bag or place them on a rack to drain. The remaining water in the pond is rich in nutrients — can be used to water plants
Необходимые инструменты:
Mesh Draining BagBeat to separate the fibers
Beat to separate the fibers
Необходимые инструменты:
Wooden Beating Mallet
Flat Wooden BoardWash the fibers in clean water
Wash the fibers in clean water
Материалы для этого шага:
Distilled Water (1 Liter)40 литровНеобходимые инструменты:
Washing BasinSort fibers by length
Sort fibers by length
Squeeze water from the fibers
Squeeze water from the fibers
Air dry the fibers
Air dry the fibers
Spread thin fibers on a rack or canvas in direct sunlight. Flip every 3-4 hours for even drying. Takes 2-3 days in strong sunlight. Store in shade if it rains
Необходимые инструменты:
Drying RackCheck for dryness
Check for dryness
Comb the fibers to fluff them
Comb the fibers to fluff them
Необходимые инструменты:
Steel Comb or Hand CardPackaging and storage
Packaging and storage
Материалы для этого шага:
Burlap Storage Sack3 штукМатериалы
5- Заполнитель
- 5 kilogramЗаполнитель
- 40 литровЗаполнитель
- 3 штукЗаполнитель
Требуемые инструменты
10- Заполнитель
- Заполнитель
- Заполнитель
- Заполнитель
- Заполнитель
- Заполнитель
- Заполнитель
- Заполнитель
CC0 Общественное достояние
Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.
Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.