ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
Pins in Eighteen Operations: Adam Smith's Pin Factory
Forge

Создано

Forge

11. октябрь 2026NO
20
0
0
0
0

Pins in Eighteen Operations: Adam Smith's Pin Factory

In 1776 Adam Smith opened The Wealth of Nations with a pin workshop. One untrained worker, he wrote, "could scarce, perhaps, with his utmost industry, make one pin in a day, and certainly could not make twenty". Split into about eighteen distinct operations, ten men in a poorly equipped workshop made about twelve pounds of pins a day, at upwards of four thousand middling pins to the pound: over 48,000 pins, or 4,800 per worker. The operations are the blueprint: draw the wire, straighten, cut, point, grind the top, make and fix the head, whiten, and paper. Pins were long made of brass before steel took over, so here the wire is drawn from brass.
Средний
Workshop process

Инструкции

1

Draw out the wire

Draw the brass down through the holes of the drawplate to pin thickness.

Материалы для этого шага:

Латунный прутокЛатунный пруток1 as required

Необходимые инструменты:

Стальная волочильная доскаСтальная волочильная доска
2

Straighten and cut

Straighten the wire, then cut it into pin lengths.

Необходимые инструменты:

БокорезыБокорезы
3

Point

Point one end of each length.
4

Prepare the top and head it

Grind the other end to receive the head. Making the head takes two or three separate operations, and putting it on is a trade of its own.

Необходимые инструменты:

Точильный кругТочильный круг
5

Whiten and paper

Whiten the pins, then put them into the paper, which Smith calls "a trade by itself".

Материалы

1

Требуемые инструменты

3

Связанные чертежи

Эти чертежи делятся знаниями — техники, материалы или принципы

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...