Сотрудничество
ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
Self-Healing Cutting Mat: Cork Pinning Side and PVC Cutting Side, Tri-Fold (Carnegie, US 11,077,575)
Emma

Создано

Emma

9. ноябрь 2026SE
2
0
0
0
0

Self-Healing Cutting Mat: Cork Pinning Side and PVC Cutting Side, Tri-Fold (Carnegie, US 11,077,575)

A self-healing cutting mat has a PVC face that closes up again after a rotary cutter runs over it. L. V. Carnegie (US 11,077,575, 2021) glues a cork layer to the back of the PVC layer, so the same board takes straight pins on one side and cutting on the other, and scores it so it folds in three for storage. Which PVC heals is not given: Carnegie only says PVC mats are self-healing. Source: L. V. Carnegie, US Patent 11,077,575 (filed 2018, granted 2021). Picture: its Figs. 1 and 3.
Начинающий
Unknown

Инструкции

1

Read Carnegie

"Polyvinyl chloride (PVC) mats provide a rigid, self-healing surface on which a rotary cutter may be used ... Fabrics and crafts cannot be pinned directly to PVC mats".
2

Cut the two layers

Cut a PVC sheet and a cork sheet to the same size. Carnegie: each layer 1/8 to 1/2 in. thick (cork 1/4 to 1/2 in.); one mat is 72 in. long by 40 in. wide, but any size will do. The PVC grade that self-heals is not given.

Материалы для этого шага:

Лист ПВХЛист ПВХ1 cutting layer, self-healing grade not given
Пробковый листПробковый лист1 pinning layer

Необходимые инструменты:

Строительный ножСтроительный нож
Поверочная линейкаПоверочная линейка
РулеткаРулетка
Неизвестные размерыНеизвестные размеры
3

Glue them back to back

Glue the cork to the back of the PVC so the cork face takes pins and the PVC face takes the cutter. Carnegie allows glue, screws, rivets, magnets or a case; the glue is not given.

Материалы для этого шага:

Неизвестный материалНеизвестный материал1 glue, not given

Необходимые инструменты:

Прикаточный валикПрикаточный валик
4

Score the folds and mark the grid

Score two lines across the full width, partly or fully through the layers, so the mat folds into three panels with its faces inward. Print measured grid lines on either face, or stick on a printed paper grid. How deep to score is not given.

Необходимые инструменты:

Строительный ножСтроительный нож
Поверочная линейкаПоверочная линейка
5

Use it

Unfold the mat flat. Pin fabric and paper patterns to the cork side; turn it over and cut on the PVC side with a rotary cutter. Fold it up for storage.

Материалы

3

Требуемые инструменты

5

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...