ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
The Gripping Shoe Horn: A Jaw That Locks Over Centre
Martin

Создано

Martin

28. сентябрь 2026NO
7
0
0
0
0

The Gripping Shoe Horn: A Jaw That Locks Over Centre

A shoe horn lets the heel slide past the back of the shoe. On a low shoe with no strap, the shoe itself slips away as the foot pushes, so there is nothing to pull against. Elmer E. Wolf of Springfield, Ohio, received US 466,643, dated 5 January 1892 (filed 17 January 1891), for a shoe-horn with a pivoted clamping-piece "adapted to take hold of or grip a shoe". A cam on the handle gives a "setting action" that "occurs as soon as the point e arrives in line with or passes the pivot F of the handle and clamping-piece". This rung works out why an over-centre clamp holds itself shut, then builds one in card and puts on a shoe with and without a horn.
Начинающий
About 1 hour

Инструкции

1

Before the line, and past it

Загрузка блокнота Jupyter…
2

The tool for taking the boot off

The embedded blueprint is the 1866 boot-jack, which grips the heel to pull a boot off; the shoe horn grips it to get the shoe on.
3

Read US 466,643

"My invention relates to certain new and useful improvements in shoe-horns; and the object of my improvements is to provide a device adapted to take hold of or grip a shoe and maintain its temporary position thereon by a setting action and allow of yet further gripping action on the said shoe in putting it on the foot." "As ordinarily formed the shoe-horn has no gripping action on the shoe itself to assist in its adjustment on the foot, and my device is especially adapted for low-cut shoes, or those not provided with a back strap." The clamping-piece has "a rubber lining-surface D, corrugated or otherwise adapted to promote the contact of the clamping device with the leather without marring the same." "This setting action of the handle and clamping-piece occurs as soon as the point e arrives in line with or passes the pivot F of the handle and clamping-piece. The farther this bearing-point e passes said pivot the greater the setting action, since any pressure on the clamping-piece tending to force it outward or open the jaws will only tend to force this point e still farther past the pivot."
4

Putting a shoe on, as a program

Рабочая область Blockly

Loading Blockly workspace...

5

Build an over-centre lock in card, then time a shoe

Cut a jaw and a handle from stiff card. Pivot the jaw to a base strip with a nail pushed through an awl hole, and hinge the handle to the jaw so that its end presses on the base. Push the handle down slowly and feel the moment it snaps past the line and holds. Press on the jaw: before the snap it opens, after it stays shut. Then put on a snug low shoe ten times without a horn and ten times with one, timing each, and hook the force meter into the heel to feel how hard the shoe has to be held.

Материалы для этого шага:

Картонные листы для шаблоновКартонные листы для шаблонов1 штука
Железные гвоздиЖелезные гвозди1 штука

Необходимые инструменты:

Рожок для обувиРожок для обуви
ШилоШило
СекундомерСекундомер
Динамометр (пружинные весы)Динамометр (пружинные весы)
ЛинейкаЛинейка
6

A clamp that will not hold, or will not let go

Over-centre clamp troubleshooting.

Flow

Loading...
7

History and honest limits

**Elmer E. Wolf** of Springfield, Ohio, filed US 466,643 on 17 January 1891; it is dated 5 January 1892. He writes that a salesman can set the horn on the heel and hand it to the buyer, whose own pull then tightens the grip. **Honest limits.** The notebook treats the handle as a rigid lever with a point contact and ignores friction at the cam, which in practice makes the lock hold a little before the line. The huge grips near the line are never reached: the jaw lining, the shoe and the card give first. Lengths and forces are examples. Your times and force readings are the measurement.

Материалы

2

Требуемые инструменты

5

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...