ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА

The Ring-Set Lemon Squeezer: A Bowl Held in Its Handle by a Screwed Ring
A squeezer's bowl set loose in a wooden handle works free, and one fixed in for good cannot be taken out to clean or replace.
James L. Jensen of Brooklyn, New York, received US 104,159, dated 14 June 1870, for "the best means of inserting a lemon-squeezer in its handles", "forming an annular flange on the cup, but below the top thereof, placing it upon the open shoulder of the handle, and detachably fastening thereon an independent annular ring flush with the top." The bowl's flange rests in a stepped recess cut in the handle's face; a wooden ring fits between the bowl's top and the recess wall and is held by screws.
This rung works out what the ring's screws carry, then makes hinged hardwood handles with a tin bowl set in a stepped recess and held by a screwed ring, and squeezes lemons with it.
Средний
About 4 hours
Инструкции
1
1
The ring's screws
The ring's screws
Загрузка блокнота Jupyter…
2
2
A hinged squeezer before it
A hinged squeezer before it
The embedded blueprint sets a sprung button in one of two hinged levers. Jensen sets the bowl itself into the handle so it can be taken out.
3
3
Read US 104,159
Read US 104,159
"I make the bowls A with a horizontal flange, B, on the outside, near the top, and provide an annular recess in the face of the handles C, to which they are to be attached. This recess is deeper than the thickness of the rim B, and it is widened on the plane of the top of the said rim when resting in the bottom. In this widened part a ring of wood, D, is secured by screws E fitting snugly between the top of the cup and the wall of the recess, and upon the top of the rim B."
"This arrangement makes a very simple, cheap, and efficient fastening, and is applicable for securing said cups into wood or metal for any other purpose."
4
4
Make the handles and set the bowl
Make the handles and set the bowl
**Bowl.** Cut the bottom 3 cm off a clean tin can and punch holes in its base. Solder a ring of tinplate round its outside 5 mm below its top as the flange B.
**Handles.** Cut two hardwood handles, one with a round end for the bowl, and join them at the other end of that round with a butt hinge. In the lower handle's round end, cut a hole the bowl drops through, and round it a stepped recess: a shoulder for the flange to rest on, widened above it.
**Ring.** Cut a hardwood ring that fits the widened part, between the bowl's top and the recess wall, and bears on the flange. Screw it down with three screws into the handle.
**Press.** Screw a hardwood dome to the upper handle so it closes into the bowl.
**Test.** Squeeze lemons over a glass. Then unscrew the ring, lift the bowl out, clean it and set it back.
Материалы для этого шага:
Жестяная банка1 штука
Лист белой жести1 штука
Бессвинцовый водопроводный припой1 штука
Флюс1 штука
Доска из твёрдой древесины1 штука
Брусок твёрдой древесины1 штука
Карточная петля1 штука
Шурупы по дереву8 штук
Лимон2 штукНеобходимые инструменты:
Ножницы по металлу
Гвозди
Молоток
Паяльник
Ножовка по дереву
Набор стамесок по дереву
Аккумуляторная дрель
Набор свёрл
Рашпиль
Набор отвёрток
Кухонный нож
Стакан
Кожаные рабочие перчатки5
5
A bowl that rocks, leaks or will not come out
A bowl that rocks, leaks or will not come out
Ring-set lemon squeezer troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**James L. Jensen** of Brooklyn, Kings County, New York, received US 104,159, dated 14 June 1870. His handles C carried the recess into which the bowls were attached, and he held the fastening applicable for securing cups in wood or metal for other purposes. His claim is the annular flange below the cup's top, the open circular recess in the handle, and the independent annular ring detachably fastened.
**Honest limits.** A tin can with a soldered flange stands in for his bowl. The notebook gives the most a screw could carry; its forces, lengths and screw counts are examples. Your squeezing and cleaning are the result.
Материалы
9- 1 штукаЗаполнитель
- 1 штукаЗаполнитель
- Заполнитель
- 1 штукаЗаполнитель
- 1 штукаЗаполнитель
- 1 штукаЗаполнитель
- 1 штукаЗаполнитель
- 8 штукЗаполнитель
- 2 штукЗаполнитель
Требуемые инструменты
13- Заполнитель
- Заполнитель
- Заполнитель
- 2 vendors sell this, none ship to you yetЗаполнитель
- Заполнитель
- Заполнитель
- 1 vendor sell this, none ship to you yetЗаполнитель
- Заполнитель
- Заполнитель
- Заполнитель
- Заполнитель
- Заполнитель
- Заполнитель
По этому чертежу делают
Связанные чертежи
Эти чертежи делятся знаниями — техники, материалы или принципы

The Spring-Button Lemon Squeezer: A Button That Gives Way So the Rind Wraps Round It
от YourGrandma
Деревообработка
35
0
0
0
0
0

The Porcelain-Lined Lemon Squeezer: Cast-Iron Handles, Porcelain Where the Juice Runs
от Mary
Гончарное дело
39
0
0
0
0
0

The Shears-Cup Lemon Squeezer: Two Cups on Crossed Handles, a Slotted Recess for the Juice
от TheChef
Металлообработка
36
0
0
0
0
0
CC0 Общественное достояние
Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.
Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.
