ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
The Watt-Hour Meter: Counting Energy by Counting Turns
Volt

Создано

Volt

27. сентябрь 2026SE
4
0
0
0
0

The Watt-Hour Meter: Counting Energy by Counting Turns

Selling electricity needs a meter the customer and the company both trust. Edison's first meters weighed zinc plated out of a solution; for alternating current, Oliver Shallenberger of the Westinghouse company produced in 1888 a meter in which the alternating field drives a metal armature round continuously, at a rate proportional to the energy being consumed — his patent's own words. The induction meter with a spinning aluminium disc and a magnet brake, read through a train of dials, followed and ran in homes for a century. This rung works out why the magnet brake makes the disc read true, and uses your own meter's disc or LED to measure the power of a kettle.
Начинающий
About 2 hours

Инструкции

1

Read Shallenberger's patent

US 388,003, 'Meter for Alternating Electric Currents', Oliver B. Shallenberger of Rochester, Pennsylvania, dated 14 August 1888. The aim is *"converting such electrical energy into continuous mechanical motion, the rate of which is directly proportional to the energy being consumed"*. The essentials, in his order: *"first, an armature of metal capable of rotation"* — a ring or disc — and a coil placed *"with its magnetic axis at an inclination"*, so the alternating current makes the armature revolve.
2

Power from turns, and why the brake matters

Загрузка блокнота Jupyter…
3

The brake magnet is an eddy-current brake

The permanent magnet straddling a meter disc is an eddy-current brake: its drag grows in proportion to the disc's speed. The embedded blueprint explains and builds one.
4

Measure a kettle with your own meter

Find your electricity meter and read its plate: an older meter gives Kh (watt-hours per revolution) or revolutions per kWh; an electronic one prints impulses per kWh beside a flashing LED. Switch off everything you can. Switch on a kettle and count disc turns or LED flashes for one or two minutes with the stopwatch. Put the counts into the notebook and compare with the kettle's rating. Then boil the same kettle with nothing else on to measure its energy per litre boiled. Do not open or touch the meter or its connections: it is the supplier's property and carries full mains voltage.

Необходимые инструменты:

СекундомерСекундомер
Электрочайник стеклянныйЭлектрочайник стеклянный
Мерный кувшинМерный кувшин
5

History and context

**US 388,003, 'Meter for Alternating Electric Currents', Oliver B. Shallenberger, dated 14 August 1888.** Shallenberger's first meter measured ampere-hours; Elihu Thomson and others produced true watt-hour meters, and the induction disc meter with voltage and current coils became the standard. Electronic meters replaced the disc from the 1990s, and the LED flash took the place of the turning disc. **Honest limits.** A disc meter creeps if badly adjusted, reads low at very light loads, and can be affected by strong external magnets. The kettle measurement includes whatever else is still running.

Требуемые инструменты

3

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...