Сотрудничество
ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
Hand Bellows From a Whole Ram Skin With a Wooden Head and Iron Tube (Theophilus, 12th Century)
Forge

Создано

Forge

14. ноябрь 2026NO
7
0
0
0
0

Hand Bellows From a Whole Ram Skin With a Wooden Head and Iron Tube (Theophilus, 12th Century)

The goldsmith's bellows from Theophilus's De Diversis Artibus (12th century): a ram skin stripped off whole through an opening behind, stuffed with straw and dried, cured a day and two nights in lye and salt, stretched, oiled, and fitted with a wooden head and iron tube at the neck, four sticks across the back, and a thumb loop and finger loop to work it.
Средний
About 4 days

Инструкции

1

Schedule

Загрузка блокнота Jupyter…
2

Read De Diversis Artibus, Book III

"Then make bellows from the skins of rams, thus: When the rams are killed, the skins must not be cut under the belly, but they are opened behind."
3

Strip and cure the skin

Open the ram's skin behind, not under the belly, and turn it so it strips off whole. Fill it with straw and dry it moderately. Lay it in lye and salt for a day and two nights.

Материалы для этого шага:

ОвчинаОвчина1 штука
СоломаСолома1 штука
Щёлок из древесной золыЩёлок из древесной золы1 штука
СольСоль1 штука

Необходимые инструменты:

Нож для кожиНож для кожи
Ведро на 20 литровВедро на 20 литров
4

Stretch and oil

On the third day stretch it lengthwise, but more in breadth. Anoint it (tallow is our choice) and stretch it again.

Материалы для этого шага:

Говяжий жирГовяжий жир1 штука
5

Fit the head and tube

Make a wooden head that passes through the skin's neck and bind it there; bore it for an iron tube (rolled from sheet iron, our method).

Материалы для этого шага:

Доска из твёрдой древесиныДоска из твёрдой древесины1 штука
Железный лист (кованый)Железный лист (кованый)1 штука
Джутовый шпагатДжутовый шпагат1 штука

Необходимые инструменты:

Ножовка по деревуНожовка по дереву
Коловорот с перкойКоловорот с перкой
Нож для кожиНож для кожи
МолотокМолоток
6

Fit the back and loops

Across the back opening place four pieces of wood: two joined together and fixed in the middle, two sewn onto the skin, so the joins come above and below. Sew on two loops of the same skin, a smaller one above for the thumb and a larger one below for the other four fingers.

Материалы для этого шага:

Доска из твёрдой древесиныДоска из твёрдой древесины1 штука
Льняная нитьЛьняная нить1 штука

Необходимые инструменты:

ШилоШило
Две шорные иглыДве шорные иглы
Нож для кожиНож для кожи
Ножовка по деревуНожовка по дереву
7

Use

Put the iron tube in the hole of the furnace, lay fire and charcoal at the back and front, and blow, first to dry the new furnace.
8

Troubleshooting

Bellows troubleshooting.

Flow

Loading...
9

History and honest limits

From Theophilus Presbyter, **De Diversis Artibus** (12th century), Book III, chapter IV, translated by Robert Hendrie (1847) (checked on the archive.org scan essayuponvarious00hend, pp. 211-213). He gives no sizes and does not say what the skin is anointed with; tallow, the rolled sheet-iron tube, the tools and the diagram are ours.

Материалы

9

Требуемые инструменты

7

По этому чертежу делают

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...