Ubufatanye
UBUHANZI
UBWIZA N'UBUZIMA
UBUKORIKORI
UMUCO N'AMATEKA
IMYIDAGADURO
IBIDUKIKIJE
IBIRIBWA N'IBINYOBWA
UBWUBATSI BUSUBIRA INYUMA
UBUMENYI
SIPORO
IKORANABUHANGA
IBYAMBARWA
Workbench for the Amateur: Mortised Maple Frame, Two-Board Top, Side and End Vises (Boy Mechanic, 1913)
A full-size woodworking bench from The Boy Mechanic (Popular Mechanics, 1913), "suitable for the amateur woodworker" and made "by anyone who has a few sharp tools and a little spare time": a mortise-and-tenon frame of birch or maple bolted with lag screws, a top of a 2 in and a 1 in board, a side vise and an end vise on square slides, and a back board. All sizes are the book's.
It stands 36 in high, 80 in long and 24 in deep.
Hagati
About 2 days
Amabwiriza
1
1
Cutting list
Cutting list
Gupakira ikaye ya Jupyter…
2
2
Read The Boy Mechanic
Read The Boy Mechanic
"If the stock is purchased from the mill ready planed and cut to length, much of the hard labor will be saved."
3
3
Make the lower frame
Make the lower frame
Cut tenons on the side and end rails and mortise the posts to take them. Fit them together and fasten them securely with 3/8 by 5 in lag screws through the posts into the rails, as the drawing shows.
Ibikoresho by'iyi ntambwe:
Ibiti byabajwe bigororotse1 igice
Vise nini y'igiti ifunguzwa n'urufunguzo1 igiceIbikoresho bikenewe:
Umusumeno w'abantu babiri
Umusumeno w'umugongo
Icyuma cyo kubaza umwobo w'ihuzo
Inyundo y'Igiti
Igipimo cy'inguni ya dogere mirongo cyenda
Ivuvuzo ry'ukuboko rifite umutwe
Isupana ihindurwa
Ikaramu ya penisile4
4
Fit the crosspieces and top
Fit the crosspieces and top
Screw the 1-1/2 by 3 by 24 in crosspieces to the tops of the posts, countersinking the heads (or bore the top boards to clear them). Fasten the front, 2 in top board to the crosspieces with lag screws from underneath; screw the 1 in top board down from the top.
Ibikoresho by'iyi ntambwe:
Ibiti byabajwe bigororotse1 igice
Urubaho rw'ibiti bikomeye1 igice
Ikibaho cy'Igiti Gikomeye1 igiceVise nini y'igiti ifunguzwa n'urufunguzo1 igice
Imisumari y'ibiti1 igiceIbikoresho bikenewe:
Ivuvuzo ry'ukuboko rifite umutwe
Urutonde rw'ibikoresho byo kwagura utwobo
Ikusanyirizo ry'ibitoreziIsupana ihindurwa5
5
Fit the end pieces and vise slides
Fit the end pieces and vise slides
Screw on the end pieces, countersinking the heads at the vise end. Cut 2 in square holes in the 1-1/2 by 4-1/2 by 10 in piece for the side vise slides and fit it in place, and cut square holes in one end piece for the end vise slides.
Ibikoresho by'iyi ntambwe:
Ikibaho cy'Igiti Gikomeye1 igiceImisumari y'ibiti1 igiceIbikoresho bikenewe:
Ivuvuzo ry'ukuboko rifite umutwe
Ibyuma byo kubazaInyundo y'IgitiUrutonde rw'ibikoresho byo kwagura utwoboIkusanyirizo ry'ibitorezi6
6
Fit up the two vises
Fit up the two vises
Screw the 2 in square slides (guides) to the two clamp front pieces, countersinking the heads so they are clear of the hands. The clamp screws should be about 1-1/2 in diameter, bought at a hardware store. Fit a block under the crosspiece to hold the end vise's nut. With the slides in place, bore the holes for the clamp screws and fit them.
Ibikoresho by'iyi ntambwe:
Ibiti byabajwe bigororotse1 igiceIkibaho cy'Igiti Gikomeye1 igice
Umusumari w'icyuma cyo gufata ufite ukuboko kunyerera2 ibiceImisumari y'ibiti1 igiceIbikoresho bikenewe:
Ivuvuzo ry'ukuboko rifite umutweUrutonde rw'ibikoresho byo kwagura utwoboIkusanyirizo ry'ibitorezi7
7
Back board and finish
Back board and finish
Screw the back board to the back as the top view shows. Give the bench "a couple of coats of oil" to finish and preserve the wood (boiled linseed oil, ours).
Ibikoresho by'iyi ntambwe:
Ikibaho cy'Igiti Gikomeye1 igiceImisumari y'ibiti1 igice
Amavuta y'Ubudodo Yatetse1 igice
Umwenda w'Ipamba1 igiceIbikoresho bikenewe:
Ikusanyirizo ry'ibitorezi8
8
Troubleshooting
Troubleshooting
Workbench troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From **The Boy Mechanic, Volume 1: 700 Things for Boys to Do**, edited by H. H. Windsor, Popular Mechanics, Chicago, 1913 (Project Gutenberg #12655), "A Workbench for the Amateur". All sizes and the fastening are the book's; it names no oil, so boiled linseed oil is ours, as are the metric figures.
Ibikoresho
8- 1 igiceUmwanya
- Umwanya
- 1 igiceUmwanya
- 1 igiceUmwanya
- 4 ibiceUmwanya
- Umwanya
- 1 igiceUmwanya
- 1 igiceUmwanya
Ibikoresho bikenewe
11- Umwanya
- Umwanya
- Umwanya
- Umwanya
- 1 vendor sell this, none ship to you yetUmwanya
- Umwanya
- Umwanya
Iki gishushanyo gikora
Blueprint zijyanye
Izi blueprint zisangira ubumenyi — uburyo, ibikoresho cyangwa amahame
CC0 Umurenge rusange
Iyi blueprint yasohowe munsi ya CC0. Ushobora gukoporora, guhindura, gukwirakwiza no gukoresha nta kwemererwa.
Shyigikira Umuremyi ugura ibicuruzwa binyuze muri Blueprint ye Komisiyo y'Umuremyi byashyizweho n'Abacuruzi, cyangwa kora verisiyo nshya y'iyi Blueprint ukayinjiza nk'isano muri Blueprint yawe kugira ngo musangire inyungu.