Ubufatanye
UBUHANZI
UBWIZA N'UBUZIMA
UBUKORIKORI
UMUCO N'AMATEKA
IMYIDAGADURO
IBIDUKIKIJE
IBIRIBWA N'IBINYOBWA
UBWUBATSI BUSUBIRA INYUMA
UBUMENYI
SIPORO
IKORANABUHANGA
IBYAMBARWA
Cone-Bowl Roller Butter Worker: Roll a Conical Stick Round a Conical Bowl, the Buttermilk Drains Below
Williams worked the buttermilk out of fresh butter by rolling a stick round a cone.
I. M. Williams of Blanchester, Clinton County, Ohio, received US 12,366, dated 6 February 1855, for an "Improved Butter-Dresser": a round bowl of tin or wood "tapering from top to bottom, say top four times the diameter of bottom," with a small hole in its bottom bushed with bone, set in a rim with four legs and a brace; and a round working stick nearly filling the bottom, with a bone pin that nearly fills the hole. Rolled round the bowl, the stick presses the butter while the buttermilk sinks and escapes through the hole, "while the butter is pushed from the hole all the while."
This rung works out the bowl's proportions, then prints the bowl, bush, roller, rim and brace, builds the stand, and dresses butter.
Utangiye
About 2 hours, plus printing
Amabwiriza
1
1
Four times across
Four times across
Gupakira ikaye ya Jupyter…
2
2
Working butter by hand before it
Working butter by hand before it
The embedded blueprint works butter on an inclined tray with a lever. Williams rolls a conical stick round a conical bowl and drains the buttermilk through its point.
3
3
Read US 12,366
Read US 12,366
"To dress a batch of butter right from the churn, take the butter dresser, place in the working stick, put in the butter, lay your hand on top of the working stick, roll it around with the circle of the bowl, backward or forward, across or otherwise, through the butter, which will cause all the butter milk, or water that may be used, to sink directly to the bottom of the bowl and escape through the hole."
4
4
Print the parts
Print the parts
Print the bowl on its rim, the bush, the roller with its pin, standing on its wide end, the rim and the brace. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Ibikoresho by'iyi ntambwe:
Fibere ya PETG1 igiceIbikoresho bikenewe:
Imashini icapa 3D ikoresha umugozi (FDM)5
5
Print the bowl
Print the bowl
The bowl, printed as step 4 describes.
6
6
Print the bush
Print the bush
The bush, printed as step 4 describes.
7
7
Print the roller
Print the roller
The roller, printed as step 4 describes.
8
8
Print the rim
Print the rim
The rim, printed as step 4 describes.
9
9
Print the brace
Print the brace
The brace, printed as step 4 describes.
10
10
The stand
The stand
Cut four 22 mm hardwood dowels about 260 mm long as legs. Glue their tops into the rim's sockets and their middles through the brace's sockets so the brace sits about 120 mm below the rim. Drop the bowl into the rim so its foot rests in the brace's ring, and press the bush into its bottom hole.
Ibikoresho by'iyi ntambwe:
Udukoni tw'ibiti bikomeye1 igice
Ikinyabutabire cy'Ibiti1 igiceIbikoresho bikenewe:
Umucumita w'Intoki
Urupapuro rwo Gusya11
11
The working stick
The working stick
Glue a 22 mm hardwood dowel into the roller's socket as the handle, long enough to stand well above the bowl, and round its top for the palm.
Ibikoresho by'iyi ntambwe:
Udukoni tw'ibiti bikomeye1 igiceIkinyabutabire cy'Ibiti1 igiceIbikoresho bikenewe:
Umucumita w'IntokiUrupapuro rwo Gusya12
12
The patent drawing
The patent drawing
US 12,366 drawing sheet, public domain (expired patent).
13
13
Churn, then dress the butter
Churn, then dress the butter
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Churn 1 litre in any churn until the butter comes, and drain it. Set a jug under the bowl's hole. Put the butter in the bowl, lay your hand on the stick's top and roll it round, forward and back, so the buttermilk sinks and runs out below. Pour a little cold water over it and roll on until the water runs clear; work in a pinch of salt and weigh the butter.
Ibikoresho by'iyi ntambwe:
Igice cy'ibinure cy'amata1000 ml
Umunyu w'inyanja munini1 igice
Amazi1 igiceIbikoresho bikenewe:
Igipima ubushyuhe gifite uruti rusigara mu kintu
Isaha yo Guhagarika
Iminzani ya Digitale yo mu Gikoni
Ibakure rinini ryo kuvanga ry'icyuma kitagira ingese14
14
A hole that clogs, a stick that skids
A hole that clogs, a stick that skids
Cone-bowl butter worker troubleshooting.
Flow
Loading...
15
15
History and honest limits
History and honest limits
**I. M. Williams** of Blanchester, Clinton County, Ohio, received US 12,366, dated 6 February 1855; the title is "Butter-Worker," and the text calls it a butter-dresser. The text marks the bowl A, the figures a. Williams wrote that butter dressed without water is better flavoured and keeps sweet much longer, "a fact admitted by all"; that is the inventor's claim, not tested here. He claimed a hollow cone combined with a conical roller working on its apex.
**Honest limits.** A printed bowl, bush and pin stand in for his tin or wood and bone; the quarter-full estimate is ours. FDM prints hold food in their layer lines, so wash well and replace when worn. Your weights are the result.
Ibikoresho
6- 1 igiceUmwanya
- 1 igiceUmwanya
- 2 ibiceUmwanya
- 1000 mlUmwanya
- 1 igiceUmwanya
- 1 igiceUmwanya
Ibikoresho bikenewe
7- Umwanya
- Umwanya
- Umwanya
Dosiye z'igishushanyo
5Blueprint zijyanye
Izi blueprint zisangira ubumenyi — uburyo, ibikoresho cyangwa amahame
CC0 Umurenge rusange
Iyi blueprint yasohowe munsi ya CC0. Ushobora gukoporora, guhindura, gukwirakwiza no gukoresha nta kwemererwa.
Shyigikira Umuremyi ugura ibicuruzwa binyuze muri Blueprint ye Komisiyo y'Umuremyi byashyizweho n'Abacuruzi, cyangwa kora verisiyo nshya y'iyi Blueprint ukayinjiza nk'isano muri Blueprint yawe kugira ngo musangire inyungu.