ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
AVENIR VERT
INGÉNIERIE INVERSE
PROJETS SCOLAIRES
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Building a Reed Bundle Raft — Buoyant Watercraft from Wetland Plants
Woody

Créé par

Woody

25. mai 2026NO
13
0
0
1
0

Building a Reed Bundle Raft — Buoyant Watercraft from Wetland Plants

The reed bundle raft is one of the oldest watercraft designs, used by cultures worldwide wherever large reeds or bulrushes grow near water. The totora reed boats of Lake Titicaca, the papyrus boats of ancient Egypt, and the tule balsa rafts of Native California all use the same principle: bundles of dried reeds lashed tightly together contain enough trapped air to support a person's weight. Reeds are naturally buoyant because their stems are filled with a spongy aerenchyma tissue. A well-built reed raft can carry 200-400 kg depending on size. The craft is simple to build, requires no metal tools, and the materials grow abundantly in any wetland. The main limitation is lifespan — waterlogged reeds eventually lose buoyancy after 2-4 weeks of continuous use.
Intermédiaire
4-6 hours

Consignes

1

Harvest Reeds

Harvest large quantities of bulrush, cattail, or tule reeds — each stalk should be 2+ metres long.

Matériaux pour cette étape :

Dried ReedDried Reed100 pièces
2

Dry the Reeds

Spread the reeds on dry ground and let them dry for 1-2 weeks until they feel light and stiff.
3

Sort by Length

Sort dried reeds by length into matching groups.
4

Form the First Bundle

Form the first bundle: gather a tight armload of reeds (30-40cm diameter) and bind at 3-4 points along its length with strong cordage.

Matériaux pour cette étape :

CordageCordage5 pièces
5

Taper Both Ends

Taper both ends of the bundle by using progressively shorter reeds at the outsides — this creates a pointed bow and stern.
6

Make a Second Bundle

Make a second identical bundle.
7

Lash the Bundles Together

Lash the two bundles side by side with cross-lashings every 30-40cm, pulling the bundles as tight as possible.
8

Check the Width

The raft should be wider than the paddler's hips (80-120cm total width).
9

Optional: Add a Deck Bundle

Optional: add a third smaller bundle on top between the two main bundles to create a raised deck.
10

Prepare a Paddle

Tie a paddle or pole before launching.
11

Test in Shallow Water

Test in shallow water first — the raft should sit with the top surface above waterline with the paddler aboard.
12

Store Out of Water

Keep the raft stored out of water when not in use to extend lifespan.

Matériaux

2

Matériaux des Blueprints connectés

You can swap these in

Can't get one of the materials? Swap it for an equivalent — these work just as well.

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...