UBUHANZI
UBWIZA N'UBUZIMA
UBUKORIKORI
UMUCO N'AMATEKA
IMYIDAGADURO
IBIDUKIKIJE
IBIRIBWA N'IBINYOBWA
UBWUBATSI BUSUBIRA INYUMA
UBUMENYI
SIPORO
IKORANABUHANGA
IBYAMBARWA
Rotary-and-Vibrating Dasher Churn: Turn to Churn, Lift and Plunge to Gather
Nash wanted to switch from churning to gathering "without changing the connection of the machinery."
William R. Nash of Bridgeport, Connecticut, received US 7,348, dated 7 May 1850, for working rotary and vertical churn-dashers on one shaft. A rotary dasher of four radial hollow prismatic arms, each with a hole in its forward side near the shaft and an aperture in its rear side near its end, turns above a perforated vibrating dasher held between collars. The pinion on the lid drives the shaft by a pin in a notch, "but the shaft being free to slide vertically upward," the handle on top can work the vibrating dasher up and down.
This rung looks at the hollow arms, then prints both dashers and the notched pinion, fits them in a box, and makes butter.
Hagati
About 4 hours, plus printing
Amabwiriza
1
1
Air through the arms
Air through the arms
Gupakira ikaye ya Jupyter…
2
2
Rotary and reciprocating dashers on one spindle before it
Rotary and reciprocating dashers on one spindle before it
The embedded blueprint works both dashers at once from one crank. Nash uses them one after the other: rotary to churn, vibrating to gather.
3
3
Read US 7,348
Read US 7,348
"The nature of this invention consists, principally in so arranging and combining in the same churn and upon one shaft, a horizontal rotary dasher and a vertically vibrating dasher, that while the rotary dasher is operated for the purpose of agitating the cream, the vibrating dasher remains at rest; and that when the butter is produced, the vibrating dasher may be operated for the purpose of gathering or consolidating the butter."
4
4
Print the parts
Print the parts
Print the rotary dasher with its four hollow triangular arms, the perforated vibrating dasher, the notched pinion and the crank arm. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Ibikoresho by'iyi ntambwe:
Fibere ya PETG1 igiceIbikoresho bikenewe:
Imashini icapa 3D ikoresha umugozi (FDM)5
5
Print the rotary dasher
Print the rotary dasher
The rotary dasher, printed as step 4 describes.
6
6
Print the vibrating dasher
Print the vibrating dasher
The vibrating dasher, printed as step 4 describes.
7
7
Print the notched pinion
Print the notched pinion
The notched pinion, printed as step 4 describes.
8
8
Print the crank arm
Print the crank arm
The crank arm, printed as step 4 describes.
9
9
Shaft and dashers
Shaft and dashers
Use a 12 mm hardwood dowel as the shaft, squared where the rotary dasher sits. Glue two collars of short dowel on it either side of the vibrating dasher so it is carried up and down but turns freely, and glue the rotary dasher 30 mm above. Drill a cross hole for a steel pin just above where the pinion will sit, and fit a handle on top.
Ibikoresho by'iyi ntambwe:
Udukoni tw'ibiti bikomeye1 igice
Umurongo Uzengurutse w'Icyuma Cyoroshye1 igice
Ikinyabutabire cy'Ibiti1 igiceIbikoresho bikenewe:
Umucumita w'Intoki
Icyuma Cyivumbura Kidafite Insinga
Ibyuma Byinshi byo Gucukura
Umucumita w'Ibyuma10
10
Lid, pinion and crank
Lid, pinion and crank
Take a food-safe square box about 170 mm each way and cut a two-part plywood lid, one part removable. Seat the pinion on the lid round the shaft, the pin lying in its notch. Mount a crown wheel on a short crank shaft between two posts on the lid so its pegs mesh the pinion, as his gear wheel I, and fit the crank arm.
Ibikoresho by'iyi ntambwe:
Ikibindi cyo kubikamo cy'urwego rw'ibiribwa1 igice
Urupapuro rw'ibiti byometse1 igice
Ikibaho cy'igiti cya pinusi1 igiceUdukoni tw'ibiti bikomeye1 igice
Uruganda rw'igiti #8 x 1"1 igiceIbikoresho bikenewe:
Umucumita w'ImigororwaIcyuma Cyivumbura Kidafite Insinga
Ikusanyirizo ry'ibitorezi11
11
The patent drawing
The patent drawing
US 7,348 drawing sheet, public domain (expired patent).
12
12
Churn by crank, gather by hand
Churn by crank, gather by hand
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Turn the crank; time until the butter comes. Then work the handle up and down, so the vibrating dasher gathers the butter while the gearing rests. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Ibikoresho by'iyi ntambwe:
Igice cy'ibinure cy'amata1500 ml
Umunyu w'inyanja munini1 igice
Amazi1 igiceIbikoresho bikenewe:
Igipima ubushyuhe gifite uruti rusigara mu kintu
Isaha yo Guhagarika
Iminzani ya Digitale yo mu Gikoni
Ibakure rinini ryo kuvanga ry'icyuma kitagira ingese13
13
A pin that jumps, a dasher that turns
A pin that jumps, a dasher that turns
Rotary-and-vibrating dasher troubleshooting.
Flow
Loading...
14
14
History and honest limits
History and honest limits
**William R. Nash** of Bridgeport, Fairfield County, Connecticut, received US 7,348, dated 7 May 1850. His lid was in two parts so one could be removed "without disturbing" the other; "one or more additional rotary dashers, may be attached to the vertical shaft." He claimed the application of the shaft to give a vertical reciprocating movement to the vibrating dasher and a rotary one to the others, so either can be used.
**Honest limits.** A pegged crown wheel and pinion stand in for his gear wheel and pinion; a food-safe box and printed dashers for his. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
Ibikoresho
11- 1 igiceUmwanya
- 1 igiceUmwanya
- Umwanya
- 1 igiceUmwanya
- Umwanya
- 1 igiceUmwanya
- 1 igiceUmwanya
- 1 igiceUmwanya
- 1500 mlUmwanya
- 1 igiceUmwanya
- 1 igiceUmwanya
Ibikoresho bikenewe
11- Umwanya
- 1 vendor sell this, none ship to you yetUmwanya
- Umwanya
- Umwanya
- Umwanya
- Umwanya
- Umwanya
Dosiye z'igishushanyo
4Iki gishushanyo gikora
Blueprint zijyanye
Izi blueprint zisangira ubumenyi — uburyo, ibikoresho cyangwa amahame
Double-Motion Dasher Churn: One Crank Spins One Dasher and Plunges the Other
na Emma
IBIRIBWA N'IBINYOBWA
29
0
0
0
0
0
Whirl-Frame Air Dasher Churn: Free Wheels Spun by the Milk Inside a Revolving Frame
na Martin
IBIRIBWA N'IBINYOBWA
32
0
0
0
0
0
Hollow-Arm Air Churn: A Spinning Dasher That Breathes Air Into the Cream
na Emma
IBIRIBWA N'IBINYOBWA
29
0
0
0
0
0
CC0 Umurenge rusange
Iyi blueprint yasohowe munsi ya CC0. Ushobora gukoporora, guhindura, gukwirakwiza no gukoresha nta kwemererwa.
Shyigikira Umuremyi ugura ibicuruzwa binyuze muri Blueprint ye Komisiyo y'Umuremyi byashyizweho n'Abacuruzi, cyangwa kora verisiyo nshya y'iyi Blueprint ukayinjiza nk'isano muri Blueprint yawe kugira ngo musangire inyungu.