UBUHANZI
UBWIZA N'UBUZIMA
UBUKORIKORI
UMUCO N'AMATEKA
IMYIDAGADURO
IBIDUKIKIJE
IBIRIBWA N'IBINYOBWA
UBWUBATSI BUSUBIRA INYUMA
UBUMENYI
SIPORO
IKORANABUHANGA
IBYAMBARWA
Spiral-Slide Egg Beater: Push a Slide, Two Scrolls Turn Opposite Ways
Two beaters turning opposite ways had needed gears or a rack.
Uriah Baker of Brooklyn received US 30,453, dated 23 October 1860, for an egg beater "arranging on one spindle two egg beaters, and operating them simultaneously in opposite directions, by means of independent worms or spiral threads or grooves attached to them, and an agitatory slide, working longitudinally on the spiral threads": pins on the slide turn the inner scroll one way and the outer the other as the slide is worked up and down.
This rung works out the turns per stroke, then prints two twisted bars of opposite hand and the slide's nuts, builds the spindle and scrolls, and times a beating.
Hejuru
About 4 hours, plus printing
Amabwiriza
1
1
Turns per stroke
Turns per stroke
Gupakira ikaye ya Jupyter…
2
2
Two opposite beaters from one motion before it
Two opposite beaters from one motion before it
The embedded blueprint turns two pinions opposite ways with one rack. Baker does it with two spirals of opposite hand and one slide.
3
3
Read US 30,453
Read US 30,453
"The pin G, or other equivalent device on the upper end of the reciprocating agitatory slide H, engaging into grooves formed by the spiral wires E, while the pin I, or other equivalent device on the lower end of the slide H, engaging into the spiral C, rotates the scroll D, in a direct rotatory motion. By this compound action the two scrolls cut and beat the egg to pieces with great rapidity."
4
4
Print the spirals and nuts
Print the spirals and nuts
Print the right-hand twisted bar, the left-hand one and two square-hole nuts. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.
Ibikoresho by'iyi ntambwe:
Fibere ya PETG1 igiceIbikoresho bikenewe:
Imashini icapa 3D ikoresha umugozi (FDM)5
5
Print the right-hand twisted bar
Print the right-hand twisted bar
The right-hand twisted bar, printed as step 4 describes.
6
6
Print the left-hand twisted bar
Print the left-hand twisted bar
The left-hand twisted bar, printed as step 4 describes.
7
7
Print the nut
Print the nut
The nut, printed as step 4 describes.
8
8
Spindle and inner scroll
Spindle and inner scroll
Epoxy the right-hand bar on a 240 mm rod of 5 mm steel, 60 mm from its foot. Bend two loops of stainless wire 24 mm across onto the rod's foot: the inner scroll.
Ibikoresho by'iyi ntambwe:
Umurongo Uzengurutse w'Icyuma Cyoroshye1 igice
Insinga z'icyuma kitagira ingese1 igice
Epoksi y'Ibice Bibiri1 igiceIbikoresho bikenewe:
Umucumita w'Ibyuma
Ifatiro ry'Ameza
Ikinyuranyo Gifite Impera Zizengurutse
Ipfundo Rifite Umunwa Uringaniye9
9
Upper spiral and outer scroll
Upper spiral and outer scroll
Slide the left-hand bar on above it, free to turn, and stop it with a collar. Hang two wires from a disk on its top down past the slide, and bend them into an outer scroll 44 mm across round the inner one.
Ibikoresho by'iyi ntambwe:
Insinga z'icyuma kitagira ingese1 igiceEpoksi y'Ibice Bibiri1 igice
Uruziga Rurambuye1 igiceIbikoresho bikenewe:
Ikinyuranyo Gifite Impera ZizengurutseIpfundo Rifite Umunwa Uringaniye
Ikigereranyo cya Digitale cy'Amasentimetero 610
10
The slide
The slide
Epoxy the two nuts into the ends of a 92 mm tube, one on each bar, so the tube slides along both. Fix a hardwood knob on the spindle's top.
Ibikoresho by'iyi ntambwe:
Udukoni tw'ibiti bikomeye1 igiceEpoksi y'Ibice Bibiri1 igiceIbikoresho bikenewe:
Amakariso (Ikariso ry'Intoki)
Icyuma Cyivumbura Kidafite Insinga
Ibyuma Byinshi byo Gucukura11
11
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the spindle with the right-hand bar fixed and the left-hand bar free, the slide with a square nut on each, the inner and outer scrolls, and the knob.
12
12
Beat egg whites
Beat egg whites
Hold the knob and work the slide up and down in a bowl of two egg whites; time to stiff peaks.
Ibikoresho by'iyi ntambwe:
Igi2 ibiceIbikoresho bikenewe:
Ibakure rinini ryo kuvanga ry'icyuma kitagira ingese
Isaha yo Guhagarika13
13
A slide that jams, scrolls that turn together
A slide that jams, scrolls that turn together
Spiral-slide egg beater troubleshooting.
Flow
Loading...
14
14
History and honest limits
History and honest limits
**Uriah Baker** of Brooklyn, Kings County, New York, received US 30,453, dated 23 October 1860. The lower spiral C is a permanent fixture on the spindle; the spiral E with the outer scroll F slides down onto the spindle and turns on it, kept by a shoulder; the inner scroll D is soldered to the spindle inside F; the slide is put on from the lower end and its pins inserted to engage the spirals.
**Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. Printed twisted bars and square nuts stand in for his spiral wires and pins. Your times are the result.
Ibikoresho
7- 1 igiceUmwanya
- Umwanya
- Umwanya
- 3 ibiceUmwanya
- 1 igiceUmwanya
- 1 igiceUmwanya
- 2 ibiceUmwanya
Ibikoresho bikenewe
11- Umwanya
- Umwanya
- 1 vendor sell this, none ship to you yetUmwanya
- Umwanya
- Umwanya
Dosiye z'igishushanyo
4Iki gishushanyo gikora
Blueprint zijyanye
Izi blueprint zisangira ubumenyi — uburyo, ibikoresho cyangwa amahame
Oblique-Rack Egg Beater: One Rack Turns Two Beaters Opposite Ways
na Emma
IBIRIBWA N'IBINYOBWA
38
0
0
0
0
0
Counter-Rotating Egg Beater: One Wheel, Two Beaters Turning Opposite Ways
na Martin
IBIRIBWA N'IBINYOBWA
36
0
0
0
0
0
Ratchet-Bar Egg Beater: Push a Rack, the Floats Spin Both Ways
na YourGrandma
IBIRIBWA N'IBINYOBWA
41
0
0
0
0
0
CC0 Umurenge rusange
Iyi blueprint yasohowe munsi ya CC0. Ushobora gukoporora, guhindura, gukwirakwiza no gukoresha nta kwemererwa.
Shyigikira Umuremyi ugura ibicuruzwa binyuze muri Blueprint ye Komisiyo y'Umuremyi byashyizweho n'Abacuruzi, cyangwa kora verisiyo nshya y'iyi Blueprint ukayinjiza nk'isano muri Blueprint yawe kugira ngo musangire inyungu.