UBUHANZI
UBWIZA N'UBUZIMA
UBUKORIKORI
UMUCO N'AMATEKA
IMYIDAGADURO
IBIDUKIKIJE
IBIRIBWA N'IBINYOBWA
UBWUBATSI BUSUBIRA INYUMA
UBUMENYI
SIPORO
IKORANABUHANGA
IBYAMBARWA
The Ring-Set Lemon Squeezer: A Bowl Held in Its Handle by a Screwed Ring
YourGrandma

Yaremwe na

YourGrandma

30. Nzeli 2026IS
39
0
0
0
0

The Ring-Set Lemon Squeezer: A Bowl Held in Its Handle by a Screwed Ring

A squeezer's bowl set loose in a wooden handle works free, and one fixed in for good cannot be taken out to clean or replace. James L. Jensen of Brooklyn, New York, received US 104,159, dated 14 June 1870, for "the best means of inserting a lemon-squeezer in its handles", "forming an annular flange on the cup, but below the top thereof, placing it upon the open shoulder of the handle, and detachably fastening thereon an independent annular ring flush with the top." The bowl's flange rests in a stepped recess cut in the handle's face; a wooden ring fits between the bowl's top and the recess wall and is held by screws. This rung works out what the ring's screws carry, then makes hinged hardwood handles with a tin bowl set in a stepped recess and held by a screwed ring, and squeezes lemons with it.
Hagati
About 4 hours

Amabwiriza

1

The ring's screws

Gupakira ikaye ya Jupyter…
2

A hinged squeezer before it

The embedded blueprint sets a sprung button in one of two hinged levers. Jensen sets the bowl itself into the handle so it can be taken out.
3

Read US 104,159

"I make the bowls A with a horizontal flange, B, on the outside, near the top, and provide an annular recess in the face of the handles C, to which they are to be attached. This recess is deeper than the thickness of the rim B, and it is widened on the plane of the top of the said rim when resting in the bottom. In this widened part a ring of wood, D, is secured by screws E fitting snugly between the top of the cup and the wall of the recess, and upon the top of the rim B." "This arrangement makes a very simple, cheap, and efficient fastening, and is applicable for securing said cups into wood or metal for any other purpose."
4

Make the handles and set the bowl

**Bowl.** Cut the bottom 3 cm off a clean tin can and punch holes in its base. Solder a ring of tinplate round its outside 5 mm below its top as the flange B. **Handles.** Cut two hardwood handles, one with a round end for the bowl, and join them at the other end of that round with a butt hinge. In the lower handle's round end, cut a hole the bowl drops through, and round it a stepped recess: a shoulder for the flange to rest on, widened above it. **Ring.** Cut a hardwood ring that fits the widened part, between the bowl's top and the recess wall, and bears on the flange. Screw it down with three screws into the handle. **Press.** Screw a hardwood dome to the upper handle so it closes into the bowl. **Test.** Squeeze lemons over a glass. Then unscrew the ring, lift the bowl out, clean it and set it back.

Ibikoresho by'iyi ntambwe:

Ikopo ry'icyumaIkopo ry'icyuma1 igice
Urubaho rw'icyuma gitwikiriyeUrubaho rw'icyuma gitwikiriye1 igice
Umutobe wo guhuza imiyoboro udafite isasuUmutobe wo guhuza imiyoboro udafite isasu1 igice
Umuti wo gusudiraUmuti wo gusudira1 igice
Ikibaho cy'Igiti GikomeyeIkibaho cy'Igiti Gikomeye1 igice
Igihimba cy'Igiti GikomeyeIgihimba cy'Igiti Gikomeye1 igice
Ifatanya ry'urugiIfatanya ry'urugi1 igice
Imisumari y'ibitiImisumari y'ibiti8 ibice
IndimuIndimu2 ibice

Ibikoresho bikenewe:

Ibyuma bikata ibyuma bisanzweIbyuma bikata ibyuma bisanzwe
ImisumariImisumari
InyundoInyundo
Icyuma cyo gusudiraIcyuma cyo gusudira
Umucumita w'IntokiUmucumita w'Intoki
Ibikoresho by'amasuka y'igitiIbikoresho by'amasuka y'igiti
Icyuma Cyivumbura Kidafite InsingaIcyuma Cyivumbura Kidafite Insinga
Ibyuma Byinshi byo GucukuraIbyuma Byinshi byo Gucukura
Ikirwanya cy'ibyumaIkirwanya cy'ibyuma
Ikusanyirizo ry'ibitoreziIkusanyirizo ry'ibitorezi
Icyuma cyo mu gikoniIcyuma cyo mu gikoni
Ikirahuri cyo kunyweraIkirahuri cyo kunywera
Uturindantoki tw'uruhu tw'akaziUturindantoki tw'uruhu tw'akazi
5

A bowl that rocks, leaks or will not come out

Ring-set lemon squeezer troubleshooting.

Flow

Loading...
6

History and honest limits

**James L. Jensen** of Brooklyn, Kings County, New York, received US 104,159, dated 14 June 1870. His handles C carried the recess into which the bowls were attached, and he held the fastening applicable for securing cups in wood or metal for other purposes. His claim is the annular flange below the cup's top, the open circular recess in the handle, and the independent annular ring detachably fastened. **Honest limits.** A tin can with a soldered flange stands in for his bowl. The notebook gives the most a screw could carry; its forces, lengths and screw counts are examples. Your squeezing and cleaning are the result.

Ibikoresho

9

Ibikoresho bikenewe

13

CC0 Umurenge rusange

Iyi blueprint yasohowe munsi ya CC0. Ushobora gukoporora, guhindura, gukwirakwiza no gukoresha nta kwemererwa.

Shyigikira Umuremyi ugura ibicuruzwa binyuze muri Blueprint ye Komisiyo y'Umuremyi byashyizweho n'Abacuruzi, cyangwa kora verisiyo nshya y'iyi Blueprint ukayinjiza nk'isano muri Blueprint yawe kugira ngo musangire inyungu.

Ibiganiro

(0)

Injira kugira ngo ujye mu biganiro

Gutegura ibitekerezo...