Ubufatanye
UBUHANZI
UBWIZA N'UBUZIMA
UBUKORIKORI
UMUCO N'AMATEKA
IMYIDAGADURO
IBIDUKIKIJE
IBIRIBWA N'IBINYOBWA
UBWUBATSI BUSUBIRA INYUMA
UBUMENYI
SIPORO
IKORANABUHANGA
IBYAMBARWA
Thread Locker: Tetraethylene Glycol Dimethacrylate with Cumene Hydroperoxide, Set When Air Is Shut Out (Krieble, US 2,895,950)
An anaerobic thread locker. A little cumene hydroperoxide stirred into tetraethylene glycol dimethacrylate stays liquid as long as air reaches it. Shut between threads or plates, away from air, it sets into a tough resin and locks them.
Result: a liquid that keeps a year or more in a half-full bottle and locks steel in 40 minutes to 5 hours, depending on how much catalyst it holds. Heat speeds it up.
Source: V. K. Krieble (American Sealants Company), US 2,895,950 (1959), Example 1. Unknown: how the tetraethylene glycol dimethacrylate is made; the patent uses a bought commercial grade. Not given: bond strength. Picture: Wikimedia Commons.
Utangiye
2 hours
Amabwiriza
1
1
Mix in the catalyst
Mix in the catalyst
At room temperature, stir cumene hydroperoxide into commercial-grade tetraethylene glycol dimethacrylate, measuring by volume. Anything from 0.1 to 10 % works; the patent prefers 2 to 10 %. Goggles and gloves: cumene hydroperoxide is an organic peroxide, keep it cool.
Ibikoresho by'iyi ntambwe:
Tetraethylene glycol dimethacrylate100 parts by volume
Hydroperoxyde ya kumene5 parts by volume (0.1-10)Ibikoresho bikenewe:
Igikoresho gipima ibitemba
Akati ko Kuvanga
Amadarubindi Yifunze yo Kwirinda
Uturindantoki Turwanya Ibinyabutabire2
2
Store it with air
Store it with air
Keep the mixture in a container with air space, preferably polyethylene, which lets air through. Bottles stored half full stayed liquid for a year or more at room temperature.
Ibikoresho bikenewe:
Icupa rya pulasitiki3
3
Apply to the threads
Apply to the threads
Put a few drops on the threads before joining the parts. Once air is shut out it sets. Average set times between steel plates at 25-27 °C, by catalyst share: 10 %, 42 min; 5 %, 52 min; 2 1/2 %, 74 min; 1 1/4 %, 84 min. With 0.1 % it takes about five hours.
Ibikoresho bikenewe:
Agatsiko ka pipete n'igitonyanga4
4
Speed it up with heat
Speed it up with heat
Heat sets it faster: the 0.1 % mixture between glass slides, warmed to 100 °C over a steam bath, locked them in five minutes. Ours: a water bath over a burner as the steam bath.
Ibikoresho bikenewe:
Ubwogero bw'Amazi
Itara rya BunsenIbikoresho
2- 100 parts by volumeUmwanya
- 5 parts by volume (0.1-10)Umwanya
Ibikoresho bikenewe
8- Umwanya
- Umwanya
- Umwanya
- Umwanya
- Umwanya
Iki gishushanyo gikora
Blueprint zijyanye
Izi blueprint zisangira ubumenyi — uburyo, ibikoresho cyangwa amahame
CC0 Umurenge rusange
Iyi blueprint yasohowe munsi ya CC0. Ushobora gukoporora, guhindura, gukwirakwiza no gukoresha nta kwemererwa.
Shyigikira Umuremyi ugura ibicuruzwa binyuze muri Blueprint ye Komisiyo y'Umuremyi byashyizweho n'Abacuruzi, cyangwa kora verisiyo nshya y'iyi Blueprint ukayinjiza nk'isano muri Blueprint yawe kugira ngo musangire inyungu.