Ubufatanye
UBUHANZI
UBWIZA N'UBUZIMA
UBUKORIKORI
UMUCO N'AMATEKA
IMYIDAGADURO
IBIDUKIKIJE
IBIRIBWA N'IBINYOBWA
UBWUBATSI BUSUBIRA INYUMA
UBUMENYI
SIPORO
IKORANABUHANGA
IBYAMBARWA
Woven Wire Screen Cloth: Hardened Crimped Steel Rods Locked by Driven Straight Rods (Robins, US 2,154,530, 1939)
Screen cloth for gravel and stone wears out fast unless the steel is hard, but hard steel cracks when it is bent in weaving. Robins crimps the rods first, hardens them, and lays them up in layers without bending; straight hardened rods driven in endwise lock the whole panel under spring pressure.
Result: coarse screen cloth, openings 5/8 in and up, hardened to as much as 60 Rockwell C; it lasted about twice as long.
Source: Robins, US 2,154,530 (1939). He names only steel; a high-carbon steel is ours, since only a hardenable steel reaches 60 Rockwell C. Not given: crimp pitch, hardening heat and quench. Picture drawn by Youblob.
Hejuru
Factory process
Amabwiriza
1
1
Crimp the rods
Crimp the rods
Cut steel rods, about 3/16 in diameter or more, to length and press-crimp three sets of them between dies. Keep a fourth set straight (no more than a quarter of all rods).
Ibikoresho by'iyi ntambwe:
Inkoni y'insinga y'icyuma gikomeye gifite karubone nyinshi1 as requiredIbikoresho bikenewe:
Ikandagira ryo gukanda ibyuma2
2
Harden all the rods
Harden all the rods
Heat-harden the crimped and the straight rods before assembly; crimping first spares the dies. Robins reached 60 Rockwell C. Heat and quench: not given.
Ibikoresho bikenewe:
Ifuru ya muffle
Indobo yo gukonjesha3
3
Lay up three crimped sets
Lay up three crimped sets
Lay crimped set 1 in parallel on a table; lay set 3 across it, bends in register; lay set 2 parallel to set 1 on top, its bends opposite. Openings about 5/8 in or more.
Ibikoresho bikenewe:
Ameza y'akazi4
4
Drive in the straight rods
Drive in the straight rods
Drive the straight rods endwise, above set 2 and below set 1, alternating with set 3. They lock the panel by spring pressure without bending any rod for good; pulled out again, worn rods can be replaced.
Ibikoresho bikenewe:
Inyundo niniIbikoresho
1- Umwanya
Ibikoresho bikenewe
5- Umwanya
- Umwanya
- Umwanya
- Umwanya
Iki gishushanyo gikora
Blueprint zijyanye
Izi blueprint zisangira ubumenyi — uburyo, ibikoresho cyangwa amahame
CC0 Umurenge rusange
Iyi blueprint yasohowe munsi ya CC0. Ushobora gukoporora, guhindura, gukwirakwiza no gukoresha nta kwemererwa.
Shyigikira Umuremyi ugura ibicuruzwa binyuze muri Blueprint ye Komisiyo y'Umuremyi byashyizweho n'Abacuruzi, cyangwa kora verisiyo nshya y'iyi Blueprint ukayinjiza nk'isano muri Blueprint yawe kugira ngo musangire inyungu.