التعاون
فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء
Barium Ferrite Disc Magnet: 1 mol BaCO3 to 3 mol Iron Oxide, 1330 °C (Went, Philips 1956, Ex. 2)
Charlie

أنشأه

Charlie

28. أكتوبر 2026DE
4
0
0
0
0

Barium Ferrite Disc Magnet: 1 mol BaCO3 to 3 mol Iron Oxide, 1330 °C (Went, Philips 1956, Ex. 2)

A barium ferrite with more iron oxide: 1 mol barium carbonate to 3 mol, made as in Example 1 and passed through a 1330 °C furnace in 20 minutes. Went's rod held 1,510 gauss with a coercive force of 2,080 oersted. Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 2. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
متقدم
2 days

التعليمات

1

Weigh barium carbonate and iron oxide

Weigh 201.1 g barium carbonate (1 mol) and 480.6 g ferric oxide (3 mol). Barium carbonate is poisonous if swallowed: gloves and a dust respirator.

المواد لهذه الخطوة:

كربونات الباريوم (ويثيريت)كربونات الباريوم (ويثيريت)201.1 غ
أكسيد الحديديكأكسيد الحديديك480.6 غ

الأدوات المطلوبة:

ميزان ذو كفّتينميزان ذو كفّتين
قفازات مطاطيةقفازات مطاطية
كمّامة P100كمّامة P100
2

Mill with alcohol 13.5 hours, dry and sieve

Grind the mixture with alcohol in a ball mill for 13.5 hours, then dry it and sieve it.

الأدوات المطلوبة:

مطحنة كرات حديديةمطحنة كرات حديدية
إيثانول - درجة مخبرية، 95 %إيثانول - درجة مخبرية، 95 %
فرن تجفيففرن تجفيف
غربالغربال
3

Knead with a binder and form

Mix 300 g of the powder with a binder such as polyvinyl alcohol (Went names it or nitrocellulose) into a kneadable mass. The patent extrudes rods about 3 mm across; ours: press discs at 1.5 tonnes per cm², as in its other examples. Dry them in air for about 24 hours.

الأدوات المطلوبة:

كحول البولي فينيل (مسحوق)كحول البولي فينيل (مسحوق)
مكبس هيدروليكيمكبس هيدروليكي
قالب كبس الأقراصقالب كبس الأقراص
فرن تجفيففرن تجفيف
4

Pass through a 1330 °C zone in 20 minutes

Sinter in air at 1330 °C by passing the pieces through a 10 cm hot zone at 5 mm per minute: 20 minutes in the heat.

الأدوات المطلوبة:

فرن أنبوبيفرن أنبوبي
قفّازات مقاومة للحرارةقفّازات مقاومة للحرارة
5

Magnetise the discs

The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.

الأدوات المطلوبة:

مغناطيس كهربائيمغناطيس كهربائي
بوصلةبوصلة

المواد

2

الأدوات المطلوبة

14

المخططات ذات الصلة

هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ

CC0 ملكية عامة

هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.

ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.

النقاش

(0)

تسجيل الدخول للمشاركة في النقاش

جارٍ تحميل التعليقات...