التعاون
فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء

Barium Ferrite Disc Magnet: 0.5 mol BaCO3 to 3.5 mol Iron Oxide, 10 Minutes at 1330 °C (Went, Philips 1956, Ex. 4)
A barium ferrite with much more iron oxide: 0.5 mol barium carbonate to 3.5 mol, milled 15.5 hours, bound, formed and sintered 10 minutes at 1330 °C. Went's rod held 2,040 gauss with a coercive force of 2,380 oersted.
Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 4. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
متقدم
2 days
التعليمات
1
1
Weigh barium carbonate and iron oxide
Weigh barium carbonate and iron oxide
Weigh 99.2 g barium carbonate (0.5 mol) and 564.8 g ferric oxide (3.5 mol). Barium carbonate is poisonous if swallowed: gloves and a dust respirator.
المواد لهذه الخطوة:
كربونات الباريوم (ويثيريت)99.2 غ
أكسيد الحديديك564.8 غالأدوات المطلوبة:
ميزان ذو كفّتين
قفازات مطاطية
كمّامة P1002
2
Mill with alcohol 15.5 hours, dry and sieve
Mill with alcohol 15.5 hours, dry and sieve
Grind the mixture with alcohol in a ball mill for 15.5 hours, then dry it and sieve it.
الأدوات المطلوبة:
مطحنة كرات حديدية
إيثانول - درجة مخبرية، 95 %
فرن تجفيف
غربال3
3
Knead with a binder and form
Knead with a binder and form
Mix 300 g of the powder with a binder such as polyvinyl alcohol (Went names it or nitrocellulose) into a kneadable mass. The patent extrudes rods about 3 mm across; ours: press discs at 1.5 tonnes per cm², as in its other examples. Dry them in air for about 24 hours.
الأدوات المطلوبة:
كحول البولي فينيل (مسحوق)
مكبس هيدروليكي
قالب كبس الأقراص
فرن تجفيف4
4
Sinter in air at 1330 °C for 10 minutes
Sinter in air at 1330 °C for 10 minutes
Sinter the pieces in air at 1330 °C for 10 minutes. The patent gives no zone length or speed for this example.
الأدوات المطلوبة:
فرن أنبوبي
قفّازات مقاومة للحرارة5
5
Magnetise the discs
Magnetise the discs
The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.
الأدوات المطلوبة:
مغناطيس كهربائي
بوصلةالمواد
2- عنصر نائب
- 564.8 غعنصر نائب
الأدوات المطلوبة
14- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
هذا المخطط يصنع
المخططات ذات الصلة
هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ
CC0 ملكية عامة
هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.
ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.

