التعاون
فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء

Barium Ferrite Disc Magnet: 0.4 mol BaCO3 to 3.7 mol Iron Oxide, 1330 °C (Went, Philips 1956, Ex. 6)
A barium ferrite with 0.4 mol barium carbonate to 3.7 mol iron oxide, made as in Example 4 and passed through a 1330 °C furnace in 20 minutes. Went's rod held 1,200 gauss with a coercive force of 1,950 oersted.
Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 6. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
متقدم
2 days
التعليمات
1
1
Weigh barium carbonate and iron oxide
Weigh barium carbonate and iron oxide
Weigh 79.4 g barium carbonate (0.4 mol) and 580.9 g ferric oxide (3.7 mol). Barium carbonate is poisonous if swallowed: gloves and a dust respirator.
المواد لهذه الخطوة:
كربونات الباريوم (ويثيريت)79.4 غ
أكسيد الحديديك580.9 غالأدوات المطلوبة:
ميزان ذو كفّتين
قفازات مطاطية
كمّامة P1002
2
Mill with alcohol 15.5 hours, dry and sieve
Mill with alcohol 15.5 hours, dry and sieve
As in Example 4: grind the mixture with alcohol in a ball mill for 15.5 hours, then dry it and sieve it.
الأدوات المطلوبة:
مطحنة كرات حديدية
إيثانول - درجة مخبرية، 95 %
فرن تجفيف
غربال3
3
Knead with a binder and form
Knead with a binder and form
Mix 300 g of the powder with a binder such as polyvinyl alcohol (Went names it or nitrocellulose) into a kneadable mass. The patent extrudes rods about 3 mm across; ours: press discs at 1.5 tonnes per cm², as in its other examples. Dry them in air for about 24 hours.
الأدوات المطلوبة:
كحول البولي فينيل (مسحوق)
مكبس هيدروليكي
قالب كبس الأقراص
فرن تجفيف4
4
Pass through a 1330 °C zone in 20 minutes
Pass through a 1330 °C zone in 20 minutes
Sinter in air at 1330 °C by passing the pieces through a 10 cm hot zone at 5 mm per minute: 20 minutes in the heat.
الأدوات المطلوبة:
فرن أنبوبي
قفّازات مقاومة للحرارة5
5
Magnetise the discs
Magnetise the discs
The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.
الأدوات المطلوبة:
مغناطيس كهربائي
بوصلةالمواد
2- عنصر نائب
- 580.9 غعنصر نائب
الأدوات المطلوبة
14- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
هذا المخطط يصنع
المخططات ذات الصلة
هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ
CC0 ملكية عامة
هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.
ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.

