التعاون
فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء

Barium-Strontium Ferrite Disc Magnet: 0.5 mol BaCO3, 0.5 mol SrCO3, 1260 °C (Went, Philips 1956, Ex. 28)
A ceramic magnet with both barium and strontium: 0.5 mol barium carbonate and 0.5 mol strontium carbonate to 3 mol iron oxide, milled 15 hours, pressed and passed through a 1260 °C furnace in 20 minutes. Went's rod held 1,665 gauss with a coercive force of 3,235 oersted.
Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 28. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
متقدم
2 days
التعليمات
1
1
Weigh the carbonates and iron oxide
Weigh the carbonates and iron oxide
Weigh 99.2 g barium carbonate (0.5 mol), 73.8 g strontium carbonate (0.5 mol), 483.3 g ferric oxide (3 mol). Barium carbonate is poisonous if swallowed: gloves and a dust respirator.
المواد لهذه الخطوة:
كربونات الباريوم (ويثيريت)99.2 غ
كربونات السترونشيوم73.8 غ
أكسيد الحديديك483.3 غالأدوات المطلوبة:
ميزان ذو كفّتين
قفازات مطاطية
كمّامة P1002
2
Mill with alcohol 15 hours, dry
Mill with alcohol 15 hours, dry
Grind the mixture with alcohol in a ball mill for 15 hours, then dry it.
الأدوات المطلوبة:
مطحنة كرات حديدية
إيثانول - درجة مخبرية، 95 %
فرن تجفيف3
3
Press the powder
Press the powder
Example 28 moulds a rod without giving the pressure. Ours: press discs at 1.5 tonnes per cm², the pressure of the patent's other examples.
الأدوات المطلوبة:
مكبس هيدروليكي
قالب كبس الأقراص4
4
Pass through a 1260 °C zone in 20 minutes
Pass through a 1260 °C zone in 20 minutes
Sinter at 1260 °C by passing the pieces through a 10 cm hot zone at 5 mm per minute: 20 minutes in the heat.
الأدوات المطلوبة:
فرن أنبوبي
قفّازات مقاومة للحرارة5
5
Magnetise the discs
Magnetise the discs
The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.
الأدوات المطلوبة:
مغناطيس كهربائي
بوصلةالمواد
3- عنصر نائب
- 73.8 غعنصر نائب
- 483.3 غعنصر نائب
الأدوات المطلوبة
12- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
هذا المخطط يصنع
المخططات ذات الصلة
هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ
CC0 ملكية عامة
هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.
ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.


