التعاون
فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء
Butyraldehyde: Butyl Alcohol Dehydrogenated over Copper Pellets at 400-680 °F (Hasche, Eastman, US 2,173,111)
Charlie

أنشأه

Charlie

31. أكتوبر 2026DE
5
0
0
0
0

Butyraldehyde: Butyl Alcohol Dehydrogenated over Copper Pellets at 400-680 °F (Hasche, Eastman, US 2,173,111)

Hot copper pulls two hydrogen atoms off butyl alcohol and leaves butyraldehyde. Hasche's catalyst is copper made from blown, water-quenched cuprous oxide, in dust-free pellets that can be burnt clean and reduced again when they tire. Result: butyraldehyde, distilled off from the unchanged alcohol. Source: Hasche, US 2,173,111 (Eastman Kodak, 1939), claims 6, 9 and 12. His worked run is for propyl alcohol; conversion for butanol is not given. Picture drawn by Youblob.
متقدم
1 day

التعليمات

1

Pack the copper catalyst

Fill a tube with dust-free copper pellets made from cuprous oxide blown from molten copper and quenched in water (2-5 mesh in claim 17).

الأدوات المطلوبة:

حبيبات حفاز النحاسحبيبات حفاز النحاس
فرن أنبوبيفرن أنبوبي
2

Preheat the butyl alcohol

Vaporise and preheat the butyl alcohol to about 500-600 °F.

المواد لهذه الخطوة:

ن-بيوتانولن-بيوتانول1 as required

الأدوات المطلوبة:

فرن أنبوبيفرن أنبوبي
3

Pass it over the copper at 400-680 °F

Lead the hot vapour over the catalyst held at about 400-680 °F. It splits into butyraldehyde and hydrogen; part of the alcohol passes unchanged.

الأدوات المطلوبة:

حبيبات حفاز النحاسحبيبات حفاز النحاس
فرن أنبوبيفرن أنبوبي
ملفّ المكثّفملفّ المكثّف
4

Distil off the aldehyde

Condense the products and distil: butyraldehyde comes over first (it boils near 74 °C); distil the alcohol back in the presence of alkali and return it.

الأدوات المطلوبة:

قَرْعة تقطير تجزيئيقَرْعة تقطير تجزيئي
هيدروكسيد الصوديوم، محلول 10 %هيدروكسيد الصوديوم، محلول 10 %
5

Reactivate the spent copper

When the catalyst slows, flush it, oxidise it at about 600-800 °F, cool, and reduce it again with alcohol vapour at about 300-400 °F.

الأدوات المطلوبة:

حبيبات حفاز النحاسحبيبات حفاز النحاس
فرن أنبوبيفرن أنبوبي

المواد

1

الأدوات المطلوبة

5

المخططات ذات الصلة

هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ

CC0 ملكية عامة

هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.

ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.

النقاش

(0)

تسجيل الدخول للمشاركة في النقاش

جارٍ تحميل التعليقات...