التعاون
فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء

Carbon Resistance Ring: Laminated Paper Gelled with 10% Tung Oil, Graphite-Shellac Track
Mallory's quiet volume-control ring (US 2,144,925, 1939). Hard bases were noisy and soft paper ones changed with damp. Their answer: paper rings soaked in 10 % raw tung oil and baked, so the oil gels inside the paper. It shuts out moisture but stays soft and springy, and the wiper runs on it quietly. A graphite paint makes the track, silver paint the ends.
The picture: the patent's drawing (Fig. 3).
متوسط
1 day
التعليمات
1
1
Punch rings from three-ply paper
Punch rings from three-ply paper
The base is three papers stuck into one sheet: litho paper at the back, newsprint in the middle, manila on the face that takes the track. Punch rings from it. Ours: a punch press with a ring die.
المواد لهذه الخطوة:
ورق مصفّح ثلاثي الطبقات1 قطعةالأدوات المطلوبة:
مكبس تخريم
قالب قصّ الحلقات
قفازات مطاطية2
2
Soak 1 hour in 10 % tung oil in naphtha
Soak 1 hour in 10 % tung oil in naphtha
Soak the rings for about one hour in about 10 % raw tung oil in naphtha. Use raw oil, not heat-bodied or treated oil, so it can still gel.
المواد لهذه الخطوة:
زيت التونغ10 partsالأدوات المطلوبة:
النفتا
كأس زجاجي مدرّج
ميزان ذو كفّتين
محرّك تقليب
قناع تنفّس كامل الوجه
قفازات مطاطية3
3
Air-dry, then bake at 210–250 °C
Air-dry, then bake at 210–250 °C
Dry the rings in air for two hours or more, then bake 15 to 30 minutes at 210 to 250 °C. The oil gels in the paper's pores; the paper stays pliable.
الأدوات المطلوبة:
فرن تجفيف
مقياس حرارة الفرن
قفّازات مقاومة للحرارة4
4
Spray the graphite track
Spray the graphite track
Spray on the resistance paint, for example graphite in a shellac binder. The patent gives no proportions. The track can be tapered in thickness, width or mix to shape the resistance curve.
المواد لهذه الخطوة:
مسحوق الغرافيت1 as required
الشلّاك1 as requiredالأدوات المطلوبة:
مسدس رش
ضاغط هواء
قناع تنفّس كامل الوجه
قفازات مطاطية5
5
Paint silver ends, bake at 220 °C
Paint silver ends, bake at 220 °C
Spray or paint the two end terminals with silver particles in shellac. Dry, then bake at about 220 °C to cure and harden the track. The slight warp from soaking flattens out again.
المواد لهذه الخطوة:
دهان فضّي موصّل1 as requiredالأدوات المطلوبة:
مسدس رش
فرن تجفيف
مقياس حرارة الفرن
قفّازات مقاومة للحرارةالمواد
5- 1 قطعةعنصر نائب
- 10 partsعنصر نائب
- 1 as requiredعنصر نائب
- 1 as requiredعنصر نائب
- 1 as requiredعنصر نائب
الأدوات المطلوبة
13- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- 1 vendor sell this, none ship to you yetعنصر نائب
هذا المخطط يصنع
المخططات ذات الصلة
هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ
CC0 ملكية عامة
هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.
ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.


