فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء
Fine Silver Wire Drawn Through a Drawplate
Forge

أنشأه

Forge

14. أكتوبر 2026NO
2
0
0
0
0

Fine Silver Wire Drawn Through a Drawplate

Silver is one of the most ductile metals and draws easily into wire. Forge fine silver into a rod, taper the end, and pull it through the holes of a drawplate one size at a time, lubricated with beeswax and annealed as it stiffens. The volume stays the same, so the wire grows longer as it gets thinner. The picture: a drawplate in the vise, beeswax, and silver wire in a pan.
متوسط
Half a day

التعليمات

1

Make a rod

Hammer the fine silver into a round rod a little larger than the plate's largest hole, heating it to a dull red and quenching whenever it stiffens.

المواد لهذه الخطوة:

فضة نقيةفضة نقية30 غ
ماءماء5 لترات

الأدوات المطلوبة:

سندانسندان
مطرقة ذات رأس إسفيني عرضيمطرقة ذات رأس إسفيني عرضي
موقد بروبانموقد بروبان
كمّاشة الحدادكمّاشة الحداد
حوض تبريد الحدادةحوض تبريد الحدادة
2

Taper the end

File the first 2 cm to a long taper so it pokes through the hole.

الأدوات المطلوبة:

طقم مباردطقم مبارد
ملزمة منضدةملزمة منضدة
3

Set up the plate

Clamp the drawplate in the vise, tapered side of the holes toward you, and rub beeswax on the rod.

المواد لهذه الخطوة:

شمع النحلشمع النحل5 غ

الأدوات المطلوبة:

لوح سحب الأسلاك الفولاذيلوح سحب الأسلاك الفولاذي
ملزمة منضدةملزمة منضدة
4

Draw

Push the taper through the first hole it will not slip through, grip it with the draw tongs and pull it through in one steady pull, straight out from the plate.

الأدوات المطلوبة:

كمّاشة سحبكمّاشة سحب
لوح سحب الأسلاك الفولاذيلوح سحب الأسلاك الفولاذي
قفّازات عمل جلديةقفّازات عمل جلدية
5

Next holes, and anneal

Draw through each smaller hole in turn. When it gets stiff, coil it, anneal it to a dull red on a fire brick and quench.

الأدوات المطلوبة:

موقد بروبانموقد بروبان
طوبة حراريةطوبة حرارية
حوض تبريد الحدادةحوض تبريد الحدادة
6

Measure and coil

Stop at the size you need, measured with the caliper. Anneal it once more for soft wire and coil it.

الأدوات المطلوبة:

قدمة رقمية 6 بوصاتقدمة رقمية 6 بوصات
7

Length from the rod

جارٍ تحميل دفتر Jupyter…

المواد

3
  • عنصر نائب
  • 5 لترات
    عنصر نائب
  • عنصر نائب

الأدوات المطلوبة

12

المخططات ذات الصلة

هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ

CC0 ملكية عامة

هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.

ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.

النقاش

(0)

تسجيل الدخول للمشاركة في النقاش

جارٍ تحميل التعليقات...