فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء
Machete to a Relief Specification
Forge

أنشأه

Forge

11. أكتوبر 2026NO
19
0
0
0
0

Machete to a Relief Specification

Machete blades are typically 30–66 cm long and under 3 mm thick. The Red Cross and Red Crescent emergency catalogue sets out what a sound one must be: a 55 cm machete with a 2.5 mm blade of hot-forged carbon steel, 0.6–0.65 % carbon and 0.6–0.8 % manganese, hardened and tempered to 45–50 Rockwell C near the edge, the whole blade hardened but the tang left normalised past the first rivet hole. The wooden handle is keyed into three grooves in the tang and held by three steel rivets with washers.
متقدم
Factory process

التعليمات

1

Forge the blade

Hot-forge the carbon steel to the blade shape, 2.5 mm thick, with three grooves along the tang for the handle.

المواد لهذه الخطوة:

قضيب فولاذ كربوني (0.6 % C)قضيب فولاذ كربوني (0.6 % C)1 قطعة

الأدوات المطلوبة:

كور الحدّادكور الحدّاد
مطرقة الحدباتمطرقة الحدبات
2

Harden and temper

Harden and temper the whole blade to 45–50 HRC near the edge, leaving the tang normalised beyond the first rivet hole.

الأدوات المطلوبة:

كور الحدّادكور الحدّاد
جهاز قياس صلادة روكويلجهاز قياس صلادة روكويل
3

Fit the handle

Fit the wooden handle into the grooves and fix it with three steel rivets and washers.

المواد لهذه الخطوة:

عصا خشب صلب للمقابضعصا خشب صلب للمقابض1 قطعة
برشام فولاذيبرشام فولاذي3 قطع
حلقات فولاذيةحلقات فولاذية3 قطع
4

Check

Check the edge for dents and the hardness near the edge.

الأدوات المطلوبة:

جهاز قياس صلادة روكويلجهاز قياس صلادة روكويل

المواد

4

الأدوات المطلوبة

3

المخططات ذات الصلة

هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ

CC0 ملكية عامة

هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.

ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.

النقاش

(0)

تسجيل الدخول للمشاركة في النقاش

جارٍ تحميل التعليقات...