فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء
Leather Welding Gloves with Gauntlet Cuffs
Tex

أنشأه

Tex

14. أكتوبر 2026FO
12
0
0
0
0

Leather Welding Gloves with Gauntlet Cuffs

Welders and smiths wear heavy leather gloves, because hot spatter melts through synthetic cloth. Cut the hand, thumb and a wide gauntlet cuff from thick leather, and sew them with waxed linen thread in small even stitches, the seams held in a vice as glove makers did. The picture: leather gauntlet gloves with wide cuffs.
متوسط
A day

التعليمات

1

Make the pattern

Trace your hand, fingers slightly apart, on paper. Add a seam allowance of about 6 mm and room to move (our sizes). Draw the thumb as a separate piece and a cuff that flares toward the elbow.

المواد لهذه الخطوة:

ورقورق2 أوراق

الأدوات المطلوبة:

مسطرةمسطرة
مقصمقص
2

Cut the leather

Chalk the pattern onto thick leather, with the stretch running across the hand, and cut a front, a back, a thumb and a cuff for each glove, the second glove mirrored.

المواد لهذه الخطوة:

جلد مدبوغ نباتيًاجلد مدبوغ نباتيًا3 sq ft

الأدوات المطلوبة:

طباشير الخيّاططباشير الخيّاط
سكين قصّسكين قصّ
3

Set in the thumb

Cut the thumb hole in the front piece and sew the thumb in, inside out.

المواد لهذه الخطوة:

خيط كتّان مشمّعخيط كتّان مشمّع5 m

الأدوات المطلوبة:

مِخرَزمِخرَز
إبرة خياطةإبرة خياطة
4

Sew the hand

Clamp the edges of front and back together in the vice between two strips of wood and sew round the fingers with small even stitches, pricking each hole with the awl. Turn the glove right side out.

المواد لهذه الخطوة:

خيط كتّان مشمّعخيط كتّان مشمّع10 m

الأدوات المطلوبة:

ملزمة منضدةملزمة منضدة
مِخرَزمِخرَز
إبرة خياطةإبرة خياطة
5

Add the cuff

Sew the cuff into a tube and stitch it round the wrist of the glove, overlapping by a finger's width.

المواد لهذه الخطوة:

خيط كتّان مشمّعخيط كتّان مشمّع5 m

الأدوات المطلوبة:

مِخرَزمِخرَز
إبرة خياطةإبرة خياطة
6

Leather for a pair

جارٍ تحميل دفتر Jupyter…

المواد

3

الأدوات المطلوبة

7

المخططات ذات الصلة

هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ

CC0 ملكية عامة

هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.

ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.

النقاش

(0)

تسجيل الدخول للمشاركة في النقاش

جارٍ تحميل التعليقات...