التعاون
فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء
Leave-In Probe Thermometer: Stainless Probe on a Flexible Lead to a Programmable Timer (Chapman, US 6,568,848, 2003)
Penny

أنشأه

Penny

3. نوفمبر 2026DK
3
0
0
0
0

Leave-In Probe Thermometer: Stainless Probe on a Flexible Lead to a Programmable Timer (Chapman, US 6,568,848, 2003)

A meat thermometer you leave in the roast. A pointed stainless steel probe stays in the meat. A flexible lead runs out of the oven to a battery timer unit with a display, keys and a beeper. You pick the meat and how well done you want it; the unit shows the temperature and the time left, and beeps when it is done. Result: continuous reading of the inside of the meat without opening the oven. Source: P. A. Chapman and C.-A. Chang (Maverick Industries), US 6,568,848 (2003). The patent's main form sends the readings by radio; it also states this wired form. Unknown: the sensor, the circuit, the target temperatures and the materials. Picture: the patent drawing.
متوسط
Unknown

التعليمات

1

Make the probe

Make the probe of a rigid material such as stainless steel. It has a pointed end that goes into the meat, a straight section from the point, then a curved section to the other end. The temperature sensor sits inside. Not given: the type of sensor, sizes.

المواد لهذه الخطوة:

أنبوب ميزان حرارة بسدادة مدببةأنبوب ميزان حرارة بسدادة مدببة1 stainless steel
مستشعر درجة الحرارةمستشعر درجة الحرارة1 قطعة

الأدوات المطلوبة:

أبعاد غير معروفةأبعاد غير معروفة
كاوية لحامكاوية لحام
2

Fit the flexible lead and plug

Join a flexible lead to the curved end of the probe, so the probe can lie at any angle to the unit. Put a plug with a male end on the other end of the lead. Not given: the lead material, the plug type, the length.

المواد لهذه الخطوة:

كابل متعدد الموصلاتكابل متعدد الموصلات1 flexible lead
موصل غير معروفموصل غير معروف1 plug
سلك لحامسلك لحام1 as needed

الأدوات المطلوبة:

كاوية لحامكاوية لحام
أبعاد غير معروفةأبعاد غير معروفة
3

Build the timer unit

In a hand-held case, fit a microprocessor that runs the cooking programs, a liquid crystal display, a beeper and batteries. Fit nine keys: clock or timer, probe A or B, meat type, doneness, two to set and change the final temperature, hours, minutes, and start/stop. Add a jack for each probe, a stand to set it upright and a clip for a belt or pocket. Not given: the circuit, the program, the case material.

المواد لهذه الخطوة:

لوح دارة مطبوعةلوح دارة مطبوعة1 قطعة
دارة متكاملةدارة متكاملة1 microprocessor
شاشة بلورات سائلة مقطعيةشاشة بلورات سائلة مقطعية1 قطعة
زر ضغطزر ضغط9 keys
صافرة بيزوكهربائيةصافرة بيزوكهربائية1 قطعة
موصل غير معروفموصل غير معروف2 probe jacks
بطاريةبطارية1 as needed
مادة غير معروفةمادة غير معروفة1 case, stand, clip
سلك لحامسلك لحام1 as needed

الأدوات المطلوبة:

كاوية لحامكاوية لحام
طقم مفكاتطقم مفكات
4

Roast with it

Plug the probe into the timer unit. Pick the meat (beef, veal, lamb, pork, chicken, turkey) and the doneness (rare, medium rare, medium, well-done); the patent cooks to USDA guidelines. Push the probe into the meat, put it in the oven and lead the cable out to the unit, then press start. The display shows the meat, the doneness, the temperature (°F or °C) and the time left, and the beeper sounds at the right moments. A second probe watches a second piece. Not given: the temperature for each doneness.

الأدوات المطلوبة:

فرنفرن

المواد

12

الأدوات المطلوبة

4

المخططات ذات الصلة

هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ

CC0 ملكية عامة

هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.

ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.

النقاش

(0)

تسجيل الدخول للمشاركة في النقاش

جارٍ تحميل التعليقات...