التعاون
فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء
Oriented Barium Ferrite Disc Magnet: Set in a 9500 Oersted Field (Gorter, Philips 1956, Ex. 1)
Charlie

أنشأه

Charlie

28. أكتوبر 2026DE
9
0
0
0
0

Oriented Barium Ferrite Disc Magnet: Set in a 9500 Oersted Field (Gorter, Philips 1956, Ex. 1)

A ceramic magnet that is stronger in one direction. Pre-fired barium ferrite powder is suspended in polyvinyl acetate dissolved in acetone and set in a strong magnetic field, so its crystals line up. The block is heated to 500 °C in a weaker field and sintered at 1280 °C. In the principal direction it held 2,650 gauss with a coercive force of 1,775 oersted and a (BH)max of 1.3 × 10⁶; at right angles only 1,260 gauss. Source: E. W. Gorter, G. W. Rathenau and A. L. Stuyts (Philips), US 2,762,778 (1956), Example 1. They made blocks; disc size is ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
متقدم
3 days

التعليمات

1

Weigh barium carbonate and iron oxide

Weigh 450 g barium carbonate and 2000 g ferric oxide. Barium carbonate is poisonous if swallowed: gloves and a dust respirator.

المواد لهذه الخطوة:

كربونات الباريوم (ويثيريت)كربونات الباريوم (ويثيريت)450 غ
أكسيد الحديديكأكسيد الحديديك2000 غ

الأدوات المطلوبة:

ميزان ذو كفّتينميزان ذو كفّتين
قفازات مطاطيةقفازات مطاطية
كمّامة P100كمّامة P100
2

Mill 20 hours under alcohol, dry

Grind the mixture in a ball mill under alcohol for 20 hours, then dry it.

الأدوات المطلوبة:

مطحنة كرات حديديةمطحنة كرات حديدية
إيثانول - درجة مخبرية، 95 %إيثانول - درجة مخبرية، 95 %
فرن تجفيففرن تجفيف
3

Pre-fire: through a 1100 °C zone in 10 minutes

Pass the dry powder at 20 mm per minute through an electric furnace with a 20 cm hot zone at 1100 °C, in air: 10 minutes in the heat. Let it cool.

الأدوات المطلوبة:

فرن أنبوبيفرن أنبوبي
بوتقة بغطاء (خزف صيني)بوتقة بغطاء (خزف صيني)
قفّازات مقاومة للحرارةقفّازات مقاومة للحرارة
4

Grind 12 hours with alcohol, dry

Pulverise the pre-fired material in a ball mill with alcohol for 12 hours, then dry it. This is the pre-fired powder.

الأدوات المطلوبة:

مطحنة كرات حديديةمطحنة كرات حديدية
إيثانول - درجة مخبرية، 95 %إيثانول - درجة مخبرية، 95 %
فرن تجفيففرن تجفيف
5

Stir into 16 % polyvinyl acetate in acetone

Dissolve polyvinyl acetate in acetone to a 16 % solution and stir the pre-fired powder into it, 2 cc of solution per gram of powder. The binder burns off later.

الأدوات المطلوبة:

أسيتات البولي فينيلأسيتات البولي فينيل
أسيتونأسيتون
ميزان ذو كفّتينميزان ذو كفّتين
6

Orient in a 9500 oersted field

Put the suspension in a brass die between the poles of a magnet yoke and apply a first field of 9500 oersted. Let the acetone evaporate while the field is on. A small block forms.

الأدوات المطلوبة:

قالب كبس الأقراصقالب كبس الأقراص
مغناطيس كهربائيمغناطيس كهربائي
مكبس هيدروليكيمكبس هيدروليكي
7

Heat to 500 °C in a 2000 oersted field

Put the block in an electric furnace between the magnet's poles. With a second field of 2000 oersted along the first field's direction, heat to 500 °C, which burns off the rest of the binder. Then switch the field off.

الأدوات المطلوبة:

فرن أنبوبيفرن أنبوبي
مغناطيس كهربائيمغناطيس كهربائي
قفّازات مقاومة للحرارةقفّازات مقاومة للحرارة
8

Sinter: through a 1280 °C zone in 5 minutes

Pass the block at 20 mm per minute through an electric furnace in air at 1280 °C with a 10 cm hot zone: about 5 minutes in the heat.

الأدوات المطلوبة:

فرن أنبوبيفرن أنبوبي
قفّازات مقاومة للحرارةقفّازات مقاومة للحرارة
9

Magnetise in the principal direction

Magnetise the block along the direction of the first field, the principal direction. The patent magnetises it in a field in that direction; ours: an electromagnet. Find the north face with a compass.

الأدوات المطلوبة:

مغناطيس كهربائيمغناطيس كهربائي
بوصلةبوصلة

المواد

2

الأدوات المطلوبة

15

المخططات ذات الصلة

هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ

CC0 ملكية عامة

هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.

ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.

النقاش

(0)

تسجيل الدخول للمشاركة في النقاش

جارٍ تحميل التعليقات...