فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء

Pins in Eighteen Operations: Adam Smith's Pin Factory
In 1776 Adam Smith opened The Wealth of Nations with a pin workshop. One untrained worker, he wrote, "could scarce, perhaps, with his utmost industry, make one pin in a day, and certainly could not make twenty". Split into about eighteen distinct operations, ten men in a poorly equipped workshop made about twelve pounds of pins a day, at upwards of four thousand middling pins to the pound: over 48,000 pins, or 4,800 per worker. The operations are the blueprint: draw the wire, straighten, cut, point, grind the top, make and fix the head, whiten, and paper. Pins were long made of brass before steel took over, so here the wire is drawn from brass.
متوسط
Workshop process
التعليمات
1
1
Draw out the wire
Draw out the wire
Draw the brass down through the holes of the drawplate to pin thickness.
المواد لهذه الخطوة:
قضيب نحاس أصفر1 as requiredالأدوات المطلوبة:
لوح سحب الأسلاك الفولاذي2
2
Straighten and cut
Straighten and cut
Straighten the wire, then cut it into pin lengths.
الأدوات المطلوبة:
قاطعة أسلاك مائلة3
3
Point
Point
Point one end of each length.
4
4
Prepare the top and head it
Prepare the top and head it
Grind the other end to receive the head. Making the head takes two or three separate operations, and putting it on is a trade of its own.
الأدوات المطلوبة:
حجر سنّ دوّار5
5
Whiten and paper
Whiten and paper
Whiten the pins, then put them into the paper, which Smith calls "a trade by itself".
المواد
1- 1 as requiredعنصر نائب
الأدوات المطلوبة
3- عنصر نائب
- عنصر نائب
- عنصر نائب
هذا المخطط يصنع
المخططات ذات الصلة
هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ
CC0 ملكية عامة
هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.
ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.



