فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء
Propane Hand Torch: Goss, 1949
Emma

أنشأه

Emma

12. أكتوبر 2026SE
17
0
0
0
0

Propane Hand Torch: Goss, 1949

John C. Goss of Pittsburgh patented this hand torch, US 2,465,643, in March 1949. It burns propane, which turns from liquid to gas so readily that, shut in a tank, it makes its own working pressure: unlike the older blow torch, it needs no pump. The knurled cylindrical tank is also the handle. A dispersion tube hangs from the tank top to about half the tank's height and draws gas, not liquid, through a minute port in its end cap. A needle valve meters the gas to a nozzle bent back at about thirty degrees to the tank. A spring-loaded ball check valve lets the tank be filled from a supply bottle but lets nothing out.
متقدم
Workshop process

التعليمات

1

Tank

Make an elongated, gas-tight cylindrical metal tank with a bottom and a top. Knurl rows of bands round the outside: the tank is also the handle.

المواد لهذه الخطوة:

خزان وقود مخرّش للموقدخزان وقود مخرّش للموقد1 قطعة

الأدوات المطلوبة:

مخرطة معادنمخرطة معادن
أداة التخشينأداة التخشين
2

Top with bosses

Form the tank top with a valve boss and a nozzle boss integral with it. The valve boss holds a chamber divided by a valve seat; a channel joins the chamber above the seat to the bore of the nozzle boss.

المواد لهذه الخطوة:

غطاء خزان الموقد مع نتوءي الصمام والفوهةغطاء خزان الموقد مع نتوءي الصمام والفوهة1 قطعة
3

Dispersion tube

Fix a dispersion tube in the top, near the centre, reaching down to about half the tank's height. Its upper end opens into the valve chamber below the seat; its lower end carries a fixed cap with a minute inlet port.

المواد لهذه الخطوة:

أنبوب تشتيت بغطاء مدخلأنبوب تشتيت بغطاء مدخل1 قطعة
4

Valves and nozzle

Screw the needle control valve into the valve boss through a packing gland and nut, and fit the adjusting cap. Fix the nozzle pipe on the nozzle boss with a crown nut, angled back about thirty degrees to the tank. Mount the spring-loaded ball check valve in its casing in the top and close it with the sealing plug.

المواد لهذه الخطوة:

صمام تحكّم إبريصمام تحكّم إبري1 قطعة
فوهة الموقد وأنبوب الفوهةفوهة الموقد وأنبوب الفوهة1 قطعة
صمام عدم رجوع كرويصمام عدم رجوع كروي1 قطعة

الأدوات المطلوبة:

مفتاح إنجليزيمفتاح إنجليزي
5

Charge with propane

Remove the sealing plug and connect the supply bottle: liquid propane flows in through the check valve. Fill to no more than half the tank. With the control valve open while charging, liquid spitting from the nozzle shows the level has reached the dispersion tube's end. Replace the plug.

المواد لهذه الخطوة:

البروبانالبروبان1 as required

الأدوات المطلوبة:

مفتاح إنجليزيمفتاح إنجليزي

المواد

7

الأدوات المطلوبة

3

المخططات ذات الصلة

هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ

CC0 ملكية عامة

هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.

ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.

النقاش

(0)

تسجيل الدخول للمشاركة في النقاش

جارٍ تحميل التعليقات...