التعاون
فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء

Strontium-Calcium Ferrite Disc Magnet: 0.06 mol SrCO3 and 0.04 mol CaCO3, 1280 °C (Went, Philips 1956, Ex. 24)
A strontium ferrite with 0.06 mol strontium carbonate and 0.04 mol calcium carbonate to 0.6 mol iron oxide, made as in Example 23. Went's rod held 2,120 gauss with a coercive force of 1,950 oersted.
Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 24. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
متقدم
2 days
التعليمات
1
1
Weigh the carbonates and iron oxide
Weigh the carbonates and iron oxide
Weigh 8.86 g strontium carbonate (0.06 mol), 4.004 g calcium carbonate (0.04 mol), 95.55 g ferric oxide (0.6 mol). The patent prints 81.86 g of strontium carbonate beside 0.06 mol. 0.06 mol is 8.86 g (ours, at 147.63 g per mol), the weight used here.
المواد لهذه الخطوة:
كربونات السترونشيوم8.86 غ
كربونات الكالسيوم (الطباشير المطحون)4.004 غ
أكسيد الحديديك95.55 غالأدوات المطلوبة:
ميزان ذو كفّتين
كمّامة P1002
2
Mill with alcohol 4 hours, dry
Mill with alcohol 4 hours, dry
As in Example 23: grind the mixture with alcohol in a ball mill for 4 hours, then dry it.
الأدوات المطلوبة:
مطحنة كرات حديدية
إيثانول - درجة مخبرية، 95 %
فرن تجفيف3
3
Press at 1.5 t/cm²
Press at 1.5 t/cm²
Press the dry powder at 1.5 tonnes per cm² (ours: discs instead of a rod).
الأدوات المطلوبة:
مكبس هيدروليكي
قالب كبس الأقراص4
4
Pass through a 1280 °C zone in 10 minutes
Pass through a 1280 °C zone in 10 minutes
Sinter at 1280 °C by passing the pieces through a 10 cm hot zone at 10 mm per minute: 10 minutes in the heat.
الأدوات المطلوبة:
فرن أنبوبي
قفّازات مقاومة للحرارة5
5
Magnetise the discs
Magnetise the discs
The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.
الأدوات المطلوبة:
مغناطيس كهربائي
بوصلةالمواد
3- 8.86 غعنصر نائب
- عنصر نائب
- 95.55 غعنصر نائب
الأدوات المطلوبة
11- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
- عنصر نائب
هذا المخطط يصنع
المخططات ذات الصلة
هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ
CC0 ملكية عامة
هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.
ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.


