التعاون
فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء
Terephthalic Acid: Para-Xylene Oxidised by Air with Manganese and Bromide
Charlie

أنشأه

Charlie

19. أكتوبر 2026DE
7
0
0
0
0

Terephthalic Acid: Para-Xylene Oxidised by Air with Manganese and Bromide

Terephthalic acid is the acid half of PET. Both methyl groups of para-xylene are burnt to acid groups by air under pressure in hot acetic acid, with a little manganese salt and bromide as catalyst: the Mid-Century process of Saffer and Barker (US 2,833,816, 1958). The acid does not dissolve, so it is simply filtered off. Example 24 of the patent, all parts by weight. The picture: our diagram of the reactor.
متقدم
1 day

التعليمات

1

Charge the reactor

Into a corrosion-resistant pressure reactor with a water-cooled condenser on top, put 75 parts para-xylene, 150 parts acetic acid, 1 part manganese acetate (tetrahydrate) and 0.75 part ammonium bromide.

المواد لهذه الخطوة:

بارا-زيلينبارا-زيلين75 parts

الأدوات المطلوبة:

حمض الخل (الجليدي)حمض الخل (الجليدي)
أسيتات المنغنيزأسيتات المنغنيز
بروميد الأمونيومبروميد الأمونيوم
ميزان ذو كفّتينميزان ذو كفّتين
مفاعل الضغطمفاعل الضغط
ملفّ المكثّفملفّ المكثّف
نظارة واقية من رذاذ الكيماوياتنظارة واقية من رذاذ الكيماويات
قفازات مقاومة للكيماوياتقفازات مقاومة للكيماويات
2

Pressurise with air and heat to 385 °F

Raise the pressure to 400 psig with air, blown in near the bottom. Set the vent so gas leaves at 3,000 volumes per hour per volume of liquid. Heat to 385 °F (196 °C), then switch the heat off: the reaction heats itself.

الأدوات المطلوبة:

مفاعل الضغطمفاعل الضغط
ضاغط هواء صناعيضاغط هواء صناعي
ملفّ المكثّفملفّ المكثّف
ميزان حرارة مختبريميزان حرارة مختبري
3

Hold at 385–400 °F

Once the first rush is over, heat as needed to hold 385–400 °F (196–204 °C), 1.5 hours in all. It is finished when the exit gas is back to 20–21 % oxygen (Orsat analysis).

الأدوات المطلوبة:

مفاعل الضغطمفاعل الضغط
ميزان حرارة مختبريميزان حرارة مختبري
جهاز أورسات لتحليل الغازاتجهاز أورسات لتحليل الغازات
4

Cool, empty and filter

Cool to 185 °F (85 °C) and let the pressure off. Push the liquid out at 150–200 °F with nitrogen pressure, scrape out the solid, and filter everything together.

الأدوات المطلوبة:

أسطوانة غاز النيتروجينأسطوانة غاز النيتروجين
قمع زجاجي ذو ساققمع زجاجي ذو ساق
ورق ترشيحورق ترشيح
قفازات مقاومة للكيماوياتقفازات مقاومة للكيماويات
5

Wash and dry

Wash the terephthalic acid twice with hot acetic acid (75 ml each in the example) and dry it. The patent got 115 parts by weight from 100 of para-xylene.

الأدوات المطلوبة:

حمض الخل (الجليدي)حمض الخل (الجليدي)
قمع زجاجي ذو ساققمع زجاجي ذو ساق
ورق ترشيحورق ترشيح
فرن تجفيففرن تجفيف

المواد

1

الأدوات المطلوبة

15

المخططات ذات الصلة

هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ

CC0 ملكية عامة

هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.

ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.

النقاش

(0)

تسجيل الدخول للمشاركة في النقاش

جارٍ تحميل التعليقات...