فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء
The Tank-Headed Self-Feeding Brush: Soap in the Tank, a Plate to Meter It
Martin

أنشأه

Martin

6. أكتوبر 2026NO
35
0
0
0
0

The Tank-Headed Self-Feeding Brush: Soap in the Tank, a Plate to Meter It

Scrubbing a floor means going back to the bucket every few strokes. Ernest N. Broderick of Indianapolis received US 639,348, dated 19 December 1899, for a cleaning brush with a small tank on its perforated top, fed through a hollow handle from a hose; a perforated plate slid by a screw sets how far the holes open, and soap in the tank turns the water to suds — "a self-feeding brush." This rung works out how the sliding plate opens the holes, then builds the tank on a scrub brush and measures the flow at each plate setting.
متوسط
About 4 hours

التعليمات

1

Open area of the plate

جارٍ تحميل دفتر Jupyter…
2

A scrubbing brush before it

The embedded blueprint holds two brush heads on a sprung holder. Broderick puts a water tank on the head and feeds it through the handle.
3

Read US 639,348

"When used for scrubbing, the hose can be connected to a hydrant, and thus supply the desired amount of water to the brush, making it unnecessary to dip the brush into the bucket or tub of water. In other words, my device is a self-feeding brush. Should I desire to use soapy water, I can insert through the openings 10 particles of soap or soap powder. In this way I get soapsuds, which I use in scrubbing as it is needed, keeping the brush constantly supplied."
4

Perforate the brush back

Drill fourteen 4 mm holes through the scrub brush's back between the tufts, in two rows 30 mm apart.

المواد لهذه الخطوة:

فرشاة فركفرشاة فرك1 قطعة

الأدوات المطلوبة:

ملزمة منضدةملزمة منضدة
مثقاب لاسلكيمثقاب لاسلكي
طقم لقم ثقبطقم لقم ثقب
قلم تعليم ثابتقلم تعليم ثابت
مسطرةمسطرة
نظارة أمان شفافةنظارة أمان شفافة
5

Make the sliding plate

Cut an aluminium plate 10 mm shorter than the back. Drill it through the back's holes, then file its end square. Rivet two guide strips to the back's top so it slides lengthwise.

المواد لهذه الخطوة:

صفيحة ألمنيومصفيحة ألمنيوم1 قطعة
برشام سحببرشام سحب1 قطعة

الأدوات المطلوبة:

مقصّ صفائحمقصّ صفائح
مثقاب لاسلكيمثقاب لاسلكي
طقم لقم ثقبطقم لقم ثقب
مبارد (مبرد يدوي)مبارد (مبرد يدوي)
طقم مسدّس برشامطقم مسدّس برشام
6

Build the tank

Fold an aluminium box 50 mm deep to the back's size with a lid. Drill the lid for a 25 mm filling hole and a handle socket. Seal it to the back with silicone and screws.

المواد لهذه الخطوة:

صفيحة ألمنيومصفيحة ألمنيوم1 قطعة
برشام سحببرشام سحب1 قطعة
مادة إحكام سيليكونيةمادة إحكام سيليكونية1 قطعة
برغي خشب #8 × 1 بوصةبرغي خشب #8 × 1 بوصة1 قطعة

الأدوات المطلوبة:

مقصّ صفائحمقصّ صفائح
ملزمة منضدةملزمة منضدة
طقم مسدّس برشامطقم مسدّس برشام
مثقاب لاسلكيمثقاب لاسلكي
طقم لقم ثقبطقم لقم ثقب
قفّازات عمل جلديةقفّازات عمل جلدية
7

Fit the adjusting screw

Run an M4 screw through a nut epoxied on the tank's end wall so its tip pushes the plate. Turn it to close or open the holes.

المواد لهذه الخطوة:

براغي آليةبراغي آلية1 قطعة
صامولة سداسيةصامولة سداسية1 قطعة
إيبوكسي ثنائي المكوّنإيبوكسي ثنائي المكوّن1 قطعة

الأدوات المطلوبة:

مثقاب لاسلكيمثقاب لاسلكي
طقم لقم ثقبطقم لقم ثقب
طقم مفكاتطقم مفكات
8

Fit the handle

Fix 1.2 m of 15 mm copper tube in the socket with brass fittings. Fit a ball valve and hose connector at its top.

المواد لهذه الخطوة:

أنبوب نحاسيأنبوب نحاسي1 قطعة
وصلات نحاسيةوصلات نحاسية1 قطعة
محبس كرويمحبس كروي1 قطعة
شريط PTFE لإحكام الأسنان اللولبيةشريط PTFE لإحكام الأسنان اللولبية1 قطعة

الأدوات المطلوبة:

قاطع أنابيبقاطع أنابيب
مفتاح ربط قابل للضبطمفتاح ربط قابل للضبط
9

The patent drawing

US 639,348 drawing sheet, public domain (expired patent).
الخطوة 9 - Image 1
10

Measure the flow at each setting

Connect the garden hose. Set the plate fully open, half and nearly shut, and catch the water for 30 s each in the jug. Then add a squirt of soap through the filling hole and scrub.
الخطوة 10 - Image 1

المواد لهذه الخطوة:

خرطوم الحديقةخرطوم الحديقة1 قطعة
ماءماء1 قطعة
صابون قشتالي (سائل)صابون قشتالي (سائل)1 قطعة

الأدوات المطلوبة:

إبريق قياسإبريق قياس
ساعة إيقافساعة إيقاف
قدمة رقمية 6 بوصاتقدمة رقمية 6 بوصات
11

A brush that floods, starves or leaks

Tank-headed self-feeding brush troubleshooting.

Flow

Loading...
12

History and honest limits

**Ernest N. Broderick** of Indianapolis filed US 639,348 on 6 February 1899; it is dated 19 December 1899. Rubber or leather strips seal the tank to the brush-top. Two hollow adjustable joints, ground to fit and clamped by a bolt, let the handle be set at any angle, for floors, walls, windows or dusting high furniture; with compressed air instead of water it blows dust away, and a mop or duster may replace the brush. **Honest limits.** Our handle is fixed; his joints are not built here. The notebook gives open area, not flow through a real hole. Your flows are the result.

المواد

15

الأدوات المطلوبة

16

CC0 ملكية عامة

هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.

ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.

النقاش

(0)

تسجيل الدخول للمشاركة في النقاش

جارٍ تحميل التعليقات...