فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء

Woven Wire Cloth on a Wire Loom
Wire mesh, or wire gauze, is cloth woven from metal wire on a loom much like a textile loom. Warp wires run the length of the cloth; a shuttle, or in later looms sliding carriers, takes the weft wire across through the shed, and the lathe (beater) knocks it up to the fell of the cloth, twice in hand weaving. Fine wire is soft and easily kinked, so the shed is kept low to avoid straining the warp. Mesh is named by its count, historically the number of openings per inch.
متقدم
Factory process
التعليمات
1
1
Warp the loom
Warp the loom
Set the warp wires side by side at the spacing for the mesh count.
المواد لهذه الخطوة:
سلك من الفولاذ المقاوم للصدأ1 as requiredالأدوات المطلوبة:
نول نسيج الأسلاك2
2
Open a low shed
Open a low shed
Lift and lower alternate warp wires to open a shed, kept low so the warp is not strained.
الأدوات المطلوبة:
نول نسيج الأسلاك3
3
Pass the weft
Pass the weft
Carry the weft wire across through the shed with the shuttle.
الأدوات المطلوبة:
نول نسيج الأسلاك4
4
Beat up
Beat up
Bring the lathe forward to beat the weft wire up to the fell; repeat shed, weft and beat for every wire.
الأدوات المطلوبة:
نول نسيج الأسلاكالمواد
1- 1 as requiredعنصر نائب
هذا المخطط يصنع
المخططات ذات الصلة
هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ
CC0 ملكية عامة
هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.
ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.


