فنون
الجمال والعناية
حِرَف
الثقافة والتاريخ
ترفيه
البيئة
الطعام والمشروبات
الهندسة العكسية
العلوم
رياضة
التقنية
الأجهزة القابلة للارتداء
Zigzag Stitch Mechanism
Tex

أنشأه

Tex

22. سبتمبر 2026FO
36
0
0
0
0

Zigzag Stitch Mechanism

The lock-stitch machine already published sews a straight line, and a straight line of thread cannot stretch - which is why early machines could not sew knitted cloth, finish a raw edge, or work a buttonhole. The next rung is a mechanism that swings the needle bar sideways between stitches, driven by a cam turning with the main shaft. **US 1,466,150**, "Zigzag mechanism for sewing machines", Ralph M. Sharaf, filed 2. April 1917, granted 28. August 1923: a cam-driven vibration of the needle bar while the machine stitches, with the throw adjustable. Domestic zigzag machines followed in the 1950s. **You build the motion in wood** - a cam, a follower and a pen drawing the needle's path - then sew both stitches on jersey and pull them until something gives.
متوسط
3 hours

التعليمات

1

Cut a cam

From 18 mm plywood cut a 60 mm disc and drill its pivot hole 5 mm off centre: that offset is half the zigzag width. Cut a second disc with a 10 mm offset for a wider stitch.

المواد لهذه الخطوة:

لوح خشب رقائقيلوح خشب رقائقي1 قطعة

الأدوات المطلوبة:

منشار يدويمنشار يدوي
مثقاب لاسلكيمثقاب لاسلكي
مسطرةمسطرة
2

Follower and needle bar

Screw a pivoted arm to the board so one end rides on the cam's edge and the other carries a dowel - the needle bar. A spring keeps the follower against the cam. Tape a marker to the dowel.

المواد لهذه الخطوة:

براغي آليةبراغي آلية4 قطع
مجموعة نوابض ضغطمجموعة نوابض ضغط1 طقم
قضيب خشبي (وتد)قضيب خشبي (وتد)1 قطعة
قلم تعليم ثابتقلم تعليم ثابت1 قطعة

الأدوات المطلوبة:

مسدس شمع لاصقمسدس شمع لاصق
ملزمة منضدةملزمة منضدة
3

Draw the stitch

Pull a strip of graph paper steadily under the pen while turning the cam by hand, one turn per stitch. Measure the width of the trace; swap cams and repeat. Lock the follower to draw a straight line for comparison.

المواد لهذه الخطوة:

ورق بيانيورق بياني1 ورقة
شريط لاصق ورقيشريط لاصق ورقي1 لفة

الأدوات المطلوبة:

مسطرةمسطرة
4

Sew the real thing

Cut six 200 x 50 mm jersey strips. Join them in pairs with a 100 mm seam: straight stitch, zigzag 3 mm, zigzag 5 mm, all at 2.5 mm stitch length.

المواد لهذه الخطوة:

حزمة قماش جيرسيه للقمصانحزمة قماش جيرسيه للقمصان1 قطعة
خيط بوليسترخيط بوليستر10 أمتار

الأدوات المطلوبة:

ماكينة خياطةماكينة خياطة
مقص أقمشةمقص أقمشة
5

Pull until it gives

Mark 100 mm across each seam. Pull each pair apart steadily by hand and note the marked length when the thread snaps - or when it does not, and the cloth simply stretches.

الأدوات المطلوبة:

مسطرةمسطرة
شريط قياسشريط قياس
6

Thread geometry and your results

جارٍ تحميل دفتر Jupyter…
7

History & Context

**What the patent specifies:** a cam-driven mechanism that vibrates the needle bar laterally during stitching, with adjustable throw. **Modern build (derived):** a plywood cam and follower drawing the path, plus real seams for the test. The same sideways swing gave overcast edges, buttonholes and decorative stitches, and cam stacks later let a machine select a pattern. Its limits: a zigzag uses more thread, can tunnel thin cloth if the tension is wrong, and the needle bar's sideways travel puts a limit on machine speed.
الخطوة 7 - Image 1

المواد

9

الأدوات المطلوبة

8

المخططات ذات الصلة

هذه المخططات تشارك المعرفة مع هذا — التقنيات والمواد والمبادئ

CC0 ملكية عامة

هذا المخطط مُصدر بموجب CC0. يحق لك نسخه وتعديله وتوزيعه واستخدامه لأي غرض، دون طلب إذن.

ادعم الصانع بشراء منتجات عبر مخططه حيث يكسب عمولة الصانع يحددها البائعون، أو أنشئ نسخة جديدة من هذا المخطط وضمّنه كرابط في مخططك لمشاركة الإيرادات.

النقاش

(0)

تسجيل الدخول للمشاركة في النقاش

جارٍ تحميل التعليقات...